Dell PowerConnect 7048P Manual page 374

Powerconnect 7000 series stackable layer 2 and 3 switches

Hide thumbs Also See for PowerConnect 7048P:

Table of Contents

Mode............................. unknown

Data Type........................ Config Script

Source Filename.................. temp-config.scr

Management access will be blocked for the duration

of the transfer

Are you sure you want to start? (y/n) y

4 Download the new image from the USB flash drive to the switch. The

image overwrites the image that is not currently active.

console#copy usb://new_image.stk image

Mode................................... unknown

Data Type.............................. Code

Management access will be blocked for the duration

of the transfer

Are you sure you want to start? (y/n) y

5 To activate the new image after it has been successfully downloaded to the

switch, follow the procedures described in Upgrading the Firmware,

starting with

Managing Images and Files