Configuring Link Aggregation Groups - Dell PowerConnect 7048P Manual

Configuring Link Aggregation Groups

Beginning in Privileged EXEC mode, use the following commands to add
ports as LAG members and to configure the LAG hashing mode.
Command
configure
interface
interface
port-
channel-group
channel-number
mode
{on | auto}
exit
interface port-channel
number
Purpose
Enter global configuration mode.
Enter interface configuration mode for the specified port.
interface
The variable includes the interface type and
number, for example gigabitethernet 1/0/3.
You can also specify a range of ports with the interface
range command, for example, interface range
gigabitethernet 1/0/8-12 configures interfaces 8, 9, 10, 11,
and 12.
Add the port(s) to the LAG specified with the
channel-number
value. Use the auto keyword to add the
port(s) as dynamic members, or use on to specify that the
LAG membership is static.
port-channel-number
•
for the current port to join.
• on — Forces the port to join a channel without LACP .
• auto — Forces the port to join a channel with LACP .
Exit to Global Config mode.
Enter interface configuration mode for the specified LAG.
You can also specify a range of LAGs to configure with the
interface range port-channel command, for example,
interface range port-channel 1-3,10 configures LAGs 1, 2,
3, and 10.
— Number of a valid port-channel
Configuring Link Aggregation
port-
831