Configuring Green Features - Dell PowerConnect 7048P Manual

Command
CTRL + Z
show link-dependency
group_id
[group

Configuring Green Features

Beginning in Privileged EXEC mode, use the following commands to
configure and monitor energy-saving features for the ports and the switch.
Command
configure
interface
interface
green-mode energy-
detect
green-mode eee
exit
green-mode eee-lpi-
history {sampling-
seconds
interval
max
samples }
exit
show green-mode
interface
show green-mode eee-
lpi-history interface
interface
502
Configuring Port Characteristics
Purpose
Exit to Privileged EXEC mode.
View link dependency settings for all groups or for the
] specified group.
Purpose
Enter Global Configuration mode.
Enter interface configuration mode for the specified
interface. The
and number, for example gigabitethernet 1/0/3.
You can also specify a range of interfaces with the interface
range command, for example, interface range
gigabitethernet 1/0/8-12 configures interfaces 8, 9, 10, 11,
and 12.
Enable low-power idle mode on the interface.
Enable EEE low power idle mode on the interface.
Exit to global configuration mode.
Configure the global EEE LPI history collection interval
and buffer size.
| max-
Exit to Privileged EXEC mode.
View green mode settings for the specified port.
View the EEE LPI history statistics for the specified port.
interface
variable includes the interface type