Snmpv3 User Security Model (Usm) - Dell PowerConnect 8024 User Configuration Manual

SNMPv3 User Security Model (USM)

Use the User Security Model page to assign system users to SNMP groups
and to define the user authentication method.
NOTE:
You can also use the Local User Database page under Management
Security to configure SNMPv3 settings for users. For more information, see
"Local User Database" on page 186.
To display the User Security Model page, click System → SNMP → User
Security Model in the navigation panel.
Figure 12-6. SNMPv3 User Security Model
Adding Local SNMPv3 Users to a USM
To add local users:
1 Open the User Security Model page.
2 Click Add Local User.
The Add Local User page displays:
308
Configuring SNMP