Table of Contents
Advertisement
UPGRADING YOUR MACHINE'S SOFTWARE
UPGRADING YOUR MACHINE'S
SOFTWARE
You can use USB media to upgrade software for your
machine.
When an upgrade program is available on " http://
s.brother/cpeaa/ ", please download the files following the
instructions on the website and steps below.
Note
• When using USB media to upgrade the software,
check that no data other than the upgrade file is
saved on the USB media being used before
starting to upgrade.
a
While pressing
turn the main power to ON.
b
Press
.
c
Insert the USB media into the primary (top) USB port
on the machine.
d
Press
.
When upgrading is finished, the completion message
appears.
e
Turn the machine off, remove the USB media, and turn
the machine on again.
194
(Automatic threading button),
STITCH SETTING CHART
Memo
• When any of the following stitches (reverse stitch
patterns and reinforcement stitch patterns) are
selected, pressing
sew reverse stitches.
When any other stitch is selected, pressing
(Reverse stitch button) will sew reinforcement
stitches.
• The stitch pattern symbols indicate the following.
1
1
1 Reverse stitch pattern
2 Reinforcement stitch pattern
Note
• The presser foot that is displayed on each screen
when Free motion mode is OFF/ON is shown in the
table under "Presser foot".
*
Twin needle can be used by attaching zigzag foot "J".
Presser
Stitch name/
Stitch
foot
Applications
Straight stitch (Left)
General sewing, gather,
J*/O
pintuck, etc.
Straight stitch (Left)
General sewing, gather,
J*/O
pintuck, etc.
Straight stitch (Middle)
General sewing, gather,
J*/O
pintuck, etc.
Straight stitch (Middle)
General sewing, gather,
J*/O
pintuck, etc.
Triple stretch stitch
General sewing for
J*/O
reinforcement and
decorative topstitching
(Reverse stitch button) will
2
2
Stitch
Stitch
width
length
(mm
(mm
(inch))
(inch))
Auto.
Auto.
Manual
Manual
0.0 (0)
2.5 (3/32)
0.0 - 7.0
0.2 - 5.0
(0 - 1/4)
(1/64 - 3/16)
0.0 (0)
2.5 (3/32)
0.0 - 7.0
0.2 - 5.0
(0 - 1/4)
(1/64 - 3/16)
3.5 (1/8)
2.5 (3/32)
0.0 - 7.0
0.2 - 5.0
(0 - 1/4)
(1/64 - 3/16)
3.5 (1/8)
2.5 (3/32)
0.0 - 7.0
0.2 - 5.0
(0 - 1/4)
(1/64 - 3/16)
0.0 (0)
2.5 (3/32)
0.0 - 7.0
0.4 - 5.0
(0 - 1/4)
(1/64 - 3/16)
Advertisement
Table of Contents
