Table of Contents
Advertisement
b
Turn the fabric and iron the folded parts only.
1 Surface
c
Select
and attach presser foot "J".
d
Sew a straight stitch along the fold.
1 Width for pintuck
2 Wrong side
3 Surface
e
Iron the folds in the same direction.
Zigzag Stitches
Cord Guide Bobbin Cover (Using a Zigzag
Stitch)
a
Remove the bobbin cover from the machine (page 34).
b
Thread the gimp thread through the hole in the cord
guide bobbin cover from bottom to top. Position the
thread in the notch at the back of the cord guide
bobbin cover.
a
c
Snap the cord guide bobbin cover into place, making
sure that the gimp thread can be fed freely.
*
Make sure there are no restrictions when feeding the
thread.
d
Set the zigzag width from 2.0-2.5 mm (approx. 1/16 -
3/32 inch).
e
Attach advanced monogramming foot "N+".
f
Position the fabric right side up on top of the cord and
place the cord to the rear of the machine under the
presser foot.
1 Fabric (right side)
2 Gimp thread
UTILITY STITCHES
1 Notch
2 Gimp thread
3
71
Advertisement
Table of Contents
