Selecting The "Eco Mode" Or "Shutoff Support Mode; Changing The Pointer Shape When A Usb Mouse Is Used; Selecting The Initial Screen Display - Brother 882-C40 Operational Manual

LCD SCREEN
■ Selecting the "Eco Mode" or
"Shutoff Support Mode"
You can save the machine power by setting the eco
mode or the shutoff support mode.
If you leave the machine without using for a
specified period of time, the machine enters in one
of these modes.
"Eco Mode";
Machine will enter a sleep mode. Touch the screen
or any operational button to continue sewing.
"Shutoff Support Mode";
Machine will turn off after set period of time. Turn
machine off and then back on to restart sewing.
Condition Eco Mode
Available time 0 - 120 (minute)
"Start/Stop" button Green flashing
Suspended function Machine light,
Screen display, LED
pointer, Guideline
marker
After recovering The machine starts
from the previous
operation.
Press the "Start/Stop" button or touch the screen
display to recover from these modes.
a
Press .
→ The settings screen appears.
b
Press .
→ The General settings screen appears.
c
Display page 5 of the General settings
screen.
d
Use or to select the time until
entering the mode.
Note
• If you turn off the machine while the
machine is in the "Eco Mode" or the
"Shutoff Support Mode", wait for about 5
seconds before turning on the machine
again.
B-32
■ Changing the Pointer Shape When a
USB Mouse Is Used
In the settings screen, the shape can be selected for
the pointer that appears when a USB mouse is
connected. Depending upon the background color,
select the desired shape from the three that are
available.
a
Shutoff Support
Mode
b
1 - 12 (hour)
Green slow flashing
All functions
c
You need to turn off
d
the machine.
e

■ Selecting the Initial Screen Display

The Initial screen that appears on the machine can
be changed.
a
b
c
Memo
• For details on changing the background
color, refer to "Changing the Background
Colors of the Embroidery Patterns" on
page B-33.
Press .
→ The settings screen appears.
Press .
→ The General settings screen appears.
Display page 4 of the General settings
screen.
Use or to choose the pointer shape
from the three settings available (
and ).
Press to return to the original screen.
Memo
• The setting remains selected even if the
machine is turned off.
Press .
→ The settings screen appears.
Press .
→ The General settings screen appears.
Display page 5 of the General settings
screen.
,