Selecting The "Eco Mode" Or "Shutoff Support Mode; Changing The Pointer Shape When A Usb Mouse Is Used; Selecting The Initial Screen Display - Brother DreamWeaver„ VQ3000 Operation Manual

LCD SCREEN
■ Selecting the "Eco Mode" or
"Shutoff Support Mode"
You can save the machine power by setting the eco
mode or the shutoff support mode.
If you leave the machine without using for a
specified period of time, the machine enters in one
of these modes.
"Eco Mode";
Machine will enter a sleep mode. Touch the screen
or any operational button to continue sewing.
"Shutoff Support Mode";
Machine will turn off after set period of time. Turn
machine off and then back on to restart sewing.
Condition Eco Mode
Available time 0 - 120 (minute)
"Start/Stop" button Green flashing
Suspended function Machine light,
Screen display,
Guideline marker
After recovering The machine starts
from the previous
operation.
Press the "Start/Stop" button or touch the screen
display to recover from these modes.
a
Press .
→ The settings screen appears.
b
Display page 5 of the settings screen.
c
Use or to select the time until
entering the mode.
Note
• If you turn off the machine while the
machine is in the "Eco Mode" or the
"Shutoff Support Mode", wait for about 5
seconds before turning on the machine
again.
B-28
■ Changing the Pointer Shape When a
USB Mouse Is Used
In the settings screen, the shape can be selected for
the pointer that appears when a USB mouse is
connected.
a
b
c
Shutoff Support
Mode
1 - 12 (hour)
Green slow flashing
All functions
You need to turn off
the machine.
d

■ Selecting the Initial Screen Display

The Initial screen that appears on the machine can
be changed.
a
b
c
d
Press .
→ The settings screen appears.
Display page 4 of the settings screen.
Use or to choose the pointer shape
from the three settings available (
and ).
Press to return to the original screen.
Memo
• The setting remains selected even if the
machine is turned off.
Press .
→ The settings screen appears.
Display page 5 of the settings screen.
Use or to select the setting for the
initial screen display.
* Opening Screen: When the machine is turned on,
the sewing screen appears after the opening movie
screen is touched.
* Sewing Screen: When the machine is turned on, the
sewing screen appears.
Press to return to the original screen.
,