Table of Contents
Advertisement
4) You will then see a list of options. Choose the option entitled "Advanced Configuration
Options" and press <Enter>.
5) Choose "Host Adapter BIOS" from the options on the next screen and press <Enter>.
6) You will then be in the Host Adapter BIOS options menu. Choose the option entitled
"Disabled:scan bus" and press <Enter>. (Note: You can also select the "Disabled:NOT
scan" option if you do not want the bus scanned at startup).
7) Press the <Esc> key several times to remove yourself from the utility and remember to save
changes whenever you are prompted.
You can also attempt these same steps to disable the Boot ROM option on the add-in cards
though the steps may vary slightly depending on the card manufacturer. After rebooting
the machine the Insufficient Memory error should be cleared.
4.4 Riser Board PCI Interrupt Routing Map
Table 42 lists the PIRQX signals and shows how the signals are connected to the PCI bus
connectors.
Table 42: Riser board PCI connector interrupt routing map
OSB4 PIRQ Signal Name
Intel ® SRMK2 Internet Server Technical Product Specification
PCI Bus Connector 1
PIRQA
PIRQB
PIRQC
PIRQD
INTA
INTB
INTC
INTD
55
Advertisement
Table of Contents
