1. Manuals
  2. Brands
  3. Intel Manuals
  4. Server
  5. SRMK2 - Server Platform - 0 MB RAM
  6. Technical specifications

Intel SRMK2 - Server Platform - 0 MB RAM Technical Specifications

Internet server
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Intel

Technical Product Specification

The Intel
®
SRMK2 Internet Server may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are documented in the
Intel
®
SRMK2 Internet Server Specification Update.
®
SRMK2 Internet Server
February 26, 2001
iPN A39185-001

Advertisement

Table of Contents
loading

Related Manuals for Intel SRMK2 - Server Platform - 0 MB RAM

Summary of Contents for Intel SRMK2 - Server Platform - 0 MB RAM

  • Page 1: Technical Product Specification

    Technical Product Specification February 26, 2001 iPN A39185-001 The Intel ® SRMK2 Internet Server may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are documented in the Intel ®...

  • Page 2: Revision History

    Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right.

  • Page 3: Intended Audience

    NOTE Notes call attention to important information. CAUTION Cautions are included to help you avoid damaging hardware and losing data. WARNING Warnings indicate conditions that, if not observed, can cause personal injury. Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 4 <Blank Page: Prevention words> Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 5: Table Of Contents

    ASEBOARD ROGRAMMING 3.16.1 PCI Configuration Space Map......................36 3.16.2 Interrupts ............................36 3.16.3 SMI and NMI Routing........................37 3.16.4 System Management Bus (SMB) ......................37 3.17 ................... 38 ASEBOARD ONNECTORS AND UMPERS Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 6 WatchDog Timer (WDT) ........................81 7.4.3 Paging Support............................82 FLASH MEMORY UPDATE UTILITY......................83 BIOS ......................... 83 OADING THE YSTEM ERROR HANDLING, MESSAGES & BEEP CODES ..................84 ........................84 RROR OURCES AND YPES ............................ 84 RROR ANDLERS Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 7 NVIRONMENTAL IMITS RELIABILITY AND SERVICEABILITY....................102 12.1 ............................102 ELIABILITY 12.2 ............................ 102 ERVICEABILITY COMPATIBILITY TESTING........................103 SPECIFICATIONS AND CUSTOMER SUPPORT ................104 14.1 ..........................104 NLINE UPPORT 14.2 ............................. 104 PECIFICATIONS Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 8 Field Effect Transistor Front Panel Front Panel Controller Field Replaceable Unit gigabyte (1024 MB) Hertz (cycles per second) Input/Output Inter-Integrated Circuit Integrated Drive Electronics Industry Standard Architecture kilobyte (1024 bytes) Kilograms Kilovolts Intel ® SRMK2 Internet Server Technical Product Specification viii...
  • Page 9 Standard Microsystems Corporation SMBIOS System Management BIOS System Management Interrupt System Management Module Transistor-Transistor Logic Transmit Data UART Universal Asynchronous Receiving/Transmitting Underwriter’s Laboratories Universal Serial Bus Volt Volt amperes Volts alternating current Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 10 Voluntary Control Council for Interference (by data processing and electronic office equipment) Volts direct current Volts in Voltage Regulator Module Vrms Volts root-mean-square Watts Watts direct current Wake on LAN Wake on Ring Zero Insertion Force Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 11: Introduction

    Passive PCI riser (64-bit/66MHz) supports a low -profile and a full-length (13”) PCI card System management Two Heceta 3 hardware monitoring ASIC’s which work in conjunction with Web- based management software (ASM). BIOS Intel/AMI BIOS with extensions to enhance server management capabilities Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 12 <This page was intentionally left blank> Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 13: Chassis Description

    2 Chassis Description ® This section describes the features of the Intel SRMK2 Internet Server chassis. 2.1 External Chassis Features 2.1.1 Chassis Dimensions The chassis is 1.70 inches high by 16.75 inches wide behind the bezel by 24.00 inches deep (measured from the front of the bezel to the deepest portion of the rear bulkhead).

  • Page 14: Front View Of Chassis

    Figure 3: Front view of chassis without bezel Upon pivoting the front panel out and to the right, the SCSI hard disk drive bays are revealed as shown in Figure 4 below. Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 15: Rear View Of Chassis

    Supply. The AC power supply uses a standard IEC 320 power cord and is a single auto-ranging power factor corrected power supply. The AC power supply rating is described in Table 3. Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 16 0.5 sec. Additionally, the system will not be damaged by a unidirectional surge waveform of 2.0kV /3000A, with a 1.2 sec rise time and 50 sec duration. Further details on these waveforms can be obtained in ANSI/IEEE STD C62.45-1987. Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 17 Ground Ground +12V 12 24 Figure 6: DC connector pinout (J27) HECALERT# SMB_Data SMB_CLK Ground Ground Sense +3.3V Sense PWR_ON# PWRGOOD +5V Sense -12V 5 10 Figure 7: DC connector pinout (J39) Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 18 Ground Black VRM Input +3.3V Orange Ground Black +3.3V Orange Ground Black +3.3V Orange Ground Black +3.3V Orange Ground Black Ground Black Ground Black +5VSB Purple Ground Black Ground Black +12V Yellow Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 19: Dc Power Supply

    The BTU maximum rating was derived by taking the maximum wattage output of the power supply (202.9W), dividing it by the lowest efficiency of the power supply (70% or 0.70) and multiplying by the BTU conversion number of 3.41. Remember that these numbers are rated at Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 20: System Cooling

    Additionally, a baffle will be added to help keep the processors and the memory cool. You should always replace the baffle in the system when you are through working on the system. Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 21: System Peripheral Bays

    Slim-line CD-ROM Standard 40-pin IDE cable with 2 connectors; connects from secondary IDE drive* connector on the serverboard to one slim-line CD-ROM drive * Optional Accessory Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 22 Figure 9 shows drawings of all the internal cables within the system and the locations of their folds. Where applicable, the darker line indicates pin 1. Front panel SCSI hard drives Slim-line CD-ROM drive Slim-line diskette (optional) drive Figure 9: Internal cables Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 23: System Configuration

    Table 13 lists optional accessories. These accessories can be ordered: Table 13: Optional accessories Description Product Code Slim-line CD-ROM comes with one IDE ACCCDROM001 cable, installation instructions, and backplane for slim-line CD-ROM drive Jonathan Manufacturing sliding rail kit ACCRAILKIT001 Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 24: Srmk2 Serverboard Description

    Supports SMBIOS, Advanced Configuration and Power Interface (ACPI), and Plug and Play (see section 14.2 Specifications for specification compliance levels) Other Features Speaker (2) Hardware monitor chips Wake on Ring Wake on LAN SCSI LED connector Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 25: Serverboard Layout

    Wake on Ring Header Password override jumper ATI Rage XL Video Clock generator ® Intel 82559 10/100 Ethernet controllers Whitebox / Appliance Jumper Internal SCSI connector Primary IDE connector Figure 10: Serverboard components Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 26 ATI Rage XL Video Controller Back Panel ISA Bus Diskette Boot Block Flash Memory Serial Port A FDC37B782 I/O Controller Front Panel Controller Mouse Keyboard Back Panel Figure 11: Serverboard block diagram Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 27: Processors

    The processors must be secured by pushing the Zero-Insertion-Force (ZIF) socket’s lever down. The Intel SRMK2 serverboard can run in either a Uniprocessor (UP) mode or Dual Processor (DP) mode. A terminator must be placed in the second processor PGA370 socket for UP mode operation.

  • Page 28: Chipset

    Dedicated host-to-DRAM, PCI0-to-DRAM, and PCI1-to-DRAM read buffers Power Management Support for system suspend/resume Compliant with ACPI power management SMBus Support for desktop management functions Support for System Management Mode (SMM) Glueless Serial interface with OSB4 South Bridge chip Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 29: Serverworks Osb4 South Bridge Chip

    Glueless Serial interface with CNB30LE North Bridge chip Black Box Security Functions – 2X Passwords – CMOS Protection – Super I/O Security Real-Time Clock – 256-byte battery-backed CMOS SRAM – Date alarm – 16-bit counters/timers based on 82C54 Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 30: Memory

    Memory size can vary between sockets and slot vacancy between DIMMs is permitted. Mixing of DIMM size is allowed as long as they are all registered DIMMs. For a list of compatible tested memory please visit the support site at support.intel.com. The serverboard supports the following memory features: 168-pin SPD DIMMs with gold-plated contacts.

  • Page 31: Scsi Host Bus Interface

    USB keyboards under operating systems that support USB devices. The SRMK2 USB ports feature: Self-identifying peripherals that can be plugged in while the computer is running Automatic mapping of function to driver and configuration Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 32: I/O Controller

    3.9.4 Real-Time Clock, CMOS SRAM, and Battery The real-time clock is provided by the SMC FDC37B782 Super I/O chip and is compatible with DS1287 and MC146818 components. The clock provides a time-of-day clock and a multicentury Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 33: Intel ® 82559 10/100 Ethernet Controllers

    PC), updates the century byte to 20. This feature enables operating systems and applications using the BIOS date/time services to reliably manipulate the year as a four-digit value. For more information on a proper date access in systems with Intel serverboards, please visit: http://support.intel.com/support/year2000/ ®...

  • Page 34: Hardware Monitor

    Fan Tach 9 Fan Tach 2 Fan Tach 4 Fan Tach 6 Fan Tach 8 Fan 2 Chassis Intrusion (Not functional on SRMK2) +VCCP1 VCORE +2.5V +2.5V +3.3V +3.3V +3.3V STBY +5V STBY Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 35: Wake On Ring And Resume On Ring

    Requires that modem interrupt be unmasked for correct operation. 3.14 Speaker A 47 inductive speaker is mounted on the motherboard. The speaker provides audible error code (beep code) information during the power-on self test (POST). Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 36: Fan Support

    P1S2_INTBD# (PCI32 Slot2 Interrupts B & D) PCIIRQ6 FP_IRQ# (Front Panel IRQ#) PCIIRQ7 VID_IRQ# (Video IRQ#) PCIIRQ8 SCSI_IRQA# PCIIRQ9 SCSI_IRQB# PCIIRQ10 P2S1_INTAC# (PCI64 Slot1 Interrupts A & C) PCIIRQ11 P2S1_INTBD# (PCI64 Slot1 Interrupts B & D) Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 37: Smi And Nmi Routing

    (Tachometer), temperatures, voltage rails, LAN controllers, DIMM presence and size. Table 21 shows the address map of the various devices on the SM Bus. Table 21: SMB Bus Address Map Device Master/Slave C Address OSB4 Master Controller LAN Controller 1 Slave Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 38: Baseboard Connectors And Jumpers

    Figure 12: Connector groups CAUTION Only the back panel connectors of this serverboard have overcurrent protection. The internal serverboard connectors are not overcurrent protected, and should be connected only to devices inside the computer Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 39: Back Panel I/O Connectors

    PS/2 keyboard or mouse LAN #1 PS/2 keyboard or mouse USB port 0 Video USB port 1 LAN #2 Serial Port A 68-pin External SCSI (Channel A) Figure 13: Back panel I/O connectors Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 40 DCD (Data Carrier Detect) SIN # (Serial Data In) SOUT # (Serial Data Out) DTR (Data Terminal Ready) Ground DSR (Data Set Ready) RTS (Request to Send) CTS (Clear to Send) RI (Ring Indicator) Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 41: Midboard Connectors

    CDA- REQA- IOA- SDA[8]- SDA[9]- SDA[10]- SDA[11]- 3.17.2 Midboard Connectors The midboard connectors are divided into three functional groups: Peripheral interfaces SCSI LED Header Internal SCSI interface High Density Diskette Drive interface Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 42 Figure 14 shows the locations of the peripheral interface connectors. High-density diskette drive connector SCSI drive connector Primary IDE connector SCSI LED Header Figure 14: Peripheral connectors Table 28: SCSI LED connector (J35) Signal Name SCSI activity Ground Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 43 DIR# (Stepper Motor Direction) +5 V Fused MTR0# (Motor Enable A) No connect No connect No connect DSKCHG# (Diskette Change) +5 V Fused DS0# (Drive Select A) +5 V Fused INDX# (Index) +5 V Fused Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 44 Wake Headers and Power Figure 15 shows the locations of the Wake headers and power connectors. Wake on LAN connector C Power supply connector Wake on Ring connector Figure 15: Hardware management and power connectors Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 45 +5 VSB Ground 3.17.2.3 PCI Bus Riser Card Board Figure 16 shows the location of the PCI 64-bit Riser Bus Connector. PCI 64/66 Riser Connector Figure 16: PCI 64/66 Riser Card connector Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 46 P2_AD[26] P2_AD[25] P2_AD[56] P2_AD[53] +3.3V P2_AD[54] P2_AD[24] P2_CBE[3]# +3.3V P2_AD[51] P2_AD[23] P2_AD[52] P2_AD[49] +3.3V P2_AD[50] +3.3V P2_AD[22] P2_AD[21] P2_AD[47] P2_AD[20] P2_AD[19] P2_AD[48] P2_AD[45] +3.3V P2_AD[46] P2_AD[18] P2_AD[17] P2_AD[43] P2_AD[16] P2_CBE[2]# P2_AD[44] P2_AD[41] Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 47 +3.3V P2_AD[42] P2_FRAME# P2_IRDY# +3.3V P2_AD[39] +3.3V P2_AD[40] P2_AD[37] P2_TRDY# P2_DEVSEL# P2_AD[38] +3.3V P2_AD[35] P2_STOP# P2_LOCK# P2_AD[36] P2_AD[33] +3.3V P2_PERR# P2_AD[34] +3.3V A100 B100 P2_SERR# A101 P2_AD[32] B101 +3.3V Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 48: Front Panel Connector

    B Front Panel I/O Connector Figure 17: Backplane and Front panel connectors Table 35: Backplane Fan connector (J37) Signal Name Signal Name M_FAN1_TACH M_FAN2_TACH M_FAN3_TACH M_FAN4_TACH FAN_NC1 FAN_MUX[1] FAN_NC2 FAN_MUX[0] FAN_NC3 FAN_NC4 MAX_FANS FAN_NC5 FAN_NC6 Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 49 LED_HDD (scroll_sw2) RESET_SW# +5V Standby Power, POWERON_SW# Fused +3.3V Power, Fused THERM_TRIP# SLEEP_SWITCH# P1_SERR# (NMI Switch) SW3_PRESSED SW4_PRESSED LAN1_ACTLED LAN2_ACTLED LAN1_LINKLED LAN2_LINKLED LAN1_SPEEDLED LAN2_SPEEDLED PROG_LED1 PROG_LED2 SIN2# SOUT2# RTS2 CTS2 DTR2 DCD2 Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 50: Jumper Blocks

    The BIOS uses current configuration information and passwords for booting. Configure After the POST runs, setup runs automatically. The Maintenance menu is displayed. Recovery None The BIOS attempts to recover the BIOS configuration. A recovery diskette is required. Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 51 “Client” computer here can issue commands to the SRMK2 machine via a hyperterminal program. For further instructions on what commands may be given, see Appendix A. Table 39: Whitebox/Appliance jumper (J16) Signal Name Whitebox Ground Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 52: Thermal Considerations

    An ambient temperature that exceeds the board’s maximum operating temperature by more than 5°C could cause components to exceed maximum case temperature and malfunction. For information about the maximum operating temperature, see the environmental specifications in Section 11.7. Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 53: Dc Voltage Regulation

    +11.40 +12.00 +12.60 Volts -12 VDC +/- 5% -10.80 -12.00 -13.20 Volts + 5 VSB +/- 5% +4.8 +5.00 +5.25 Volts * At +12V/12sec surge, 12V output regulation can go to 10%. Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 54: Pci Riser Board

    Bus:Device:Channel for either Channel A or B. Choose either one and press <Enter>. 3) At the next screen you will have two options. Choose the option entitled “Configure/View Host Adapter Settings” and press <Enter>. Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 55: Riser Board Pci Interrupt Routing Map

    Table 42 lists the PIRQX signals and shows how the signals are connected to the PCI bus connectors. Table 42: Riser board PCI connector interrupt routing map OSB4 PIRQ Signal Name PCI Bus Connector 1 PIRQA INTA PIRQB INTB PIRQC INTC PIRQD INTD Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 56 ~1.0” ~5.0” ~1.0” Figure 20: PCI riser board Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 57: Front Panel Board

    This switch is connected to PCI32 SERR# input of the OSB4. When depressed will cause and NMI to be issued to the system. It is used to dump the system state when the (Resessed) system is hung. Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 58: Front Panel Led Indicators

    5.4 Front Panel I/O Connector The front panel board is connected to the SRMK2 serverboard through a high-density connector for I/O information. See Table 36 for Front panel I/O connector (J38) signal definitions. Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 59: Scsi Backplane

    Table 45: Fan 1-9 Power Connectors Signal Name Wire +12V Yellow Ground Black Fan Tach Table 46: Backplane Power Connector Signal Name Wire +12V Yellow +12V Yellow Ground Black Ground Black +3.3V Orange Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 60 ISC_SCL Fan Mux 0 I2C_SDA Fan Mux 1 Drive 0 Fault Fan 4 Tach Drive 1 Fault Fan 3 Tach Drive 0 Active Fan 2 Tach Drive 1 Active Fan 1 Tach Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 61: Bios Description

    7 BIOS Description 7.1 Overview The SRMK2 serverboard uses an Intel/AMI BIOS, which is stored in Flash memory and can be upgraded using a disk-based program. In addition to the BIOS, the Flash memory contains the Setup program, POST, the PCI auto-configuration utility, and Plug and Play support. This serverboard supports system BIOS shadowing, allowing the BIOS to execute from 64-bit onboard write-protected DRAM.

  • Page 62: Configuration Utility

    1 MB due to shadowing. The BIOS alone needs to know the exact Flash map. Intel reserves the right to change the Flash map without notice. All blocks in this flash part are 64k (10000h) in length. The BIOS will adjust the size of each component to fit in a given block.

  • Page 63: System Bios

    7.3.1.1.1 Resource Allocation The system BIOS identifies, allocates, and initializes resources in a manner consistent with other Intel servers. The BIOS scans for the following, in order: 1. Devices required for early console redirection 2. ISA devices 3. Off-board PCI devices 4.
  • Page 64 7.3.1.2.1 Multi-processor specification support The SRMK2 BIOS complies with all requirements of the Intel Multi-Processor Specification (MPS) version 1.4 for Symmetric Multi-Processor (SMP) support. Since Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 65 AP is left in the halt state, not the “wait for startup IPI” state. The waking agent must also ensure that the code segment containing the halt code executed by an Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 66 BIOS. The BIOS is responsible for storing the update in a non-volatile memory block and loading it into the Pentium III processor during POST sequence. The Pentium Pro processor BIOS ® ® update specification requires the system BIOS to implement function calls to read the update and Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 67: Performance Features

    3.3 for a list of supported processors. 7.3.1.7 Boot Splash Screen The SRMK2 BIOS will include default Intel logo that can be displayed during BIOS POST. The display is optional. If the QuietBoot option is disabled via BIOS setup, the BIOS displays the usual POST screen, including the memory count and the processor information during POST.
  • Page 68 The memory DIMM speed can be determined using its ID. Using this information the BIOS can set up the memory controller register for the best performance. Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 69: Reliability Features

    SBEs from being detected and logged each time the failed location(s) are accessed. This is recorded in the SEL (System Event Log) at both POST time as well as runtime with an SMI. Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 70 OS and then causes an NMI to be generated for certain events, so the OS can respond appropriately. The BIOS also logs an event on another type of memory error called Single Bit Error (SBE). For this error, the BIOS will not generate an NMI to the OS. Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 71: System Services

    The BIOS provides an interface, using the software interrupt 15h, to report system configuration information to application programs or the OS. Table 52 shows functions provided by the BIOS in addition to the IBM AT standard INT 15h functions: Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 72 Function not supported AH = 86h NOTE The SRMK2 does not support switching from writeback to write-through modes during runtime. This function is not supported if the processor is not in real mode. Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 73 4 byte build time in hhmm format 5 bytes reserved for future use CF = 1, Invalid parameters / Function not supported AH = 86h NOTE The call “Get PCIset Version” is now obsolete. Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 74: Boot Options

    7.3.5.1 Quiet Boot The BIOS includes a default Intel logo that can optionally be displayed during BIOS POST in lieu of the POST diagnostic screen. If the Quiet Boot feature is disabled via BIOS setup, during POST the BIOS displays the usual POST screen including the memory count and processor information.

  • Page 75: Oem Customization

    POST sequence. OEMs can modify the contents of the message strings and supported languages by translating Intel supplied strings into the desired language. The code in a user binary may not hook critical interrupts, reprogram the PCIset, or take any action that affects the correct functioning of the system BIOS.
  • Page 76 ;* the offsets in the table. ; In this example since the mask is defined as 04h only scanpoint_04h ; will be executed during post. This happens to occur just before video Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 77 ROM scan. This is just before boot, but prior to the scan for external ROMs and the scan for conventional BIOS in User Binary. This scan occurs immediately after the “normal” User Binary area scan. Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 78: Smbios Support

    POST and general error messages with text strings translated into a particular language. Intel provides specifications for all BIOS text strings, so that any OEM can have them translated and prepared for updating with iFLASH. By default, the BIOS provides language support for English, Spanish, French, German, and Italian.

  • Page 79: Soft Power Switch

    SMI is initialized. The SMI handler only sets the state machine in the OSB4 to the off state if the OS is not yet running. Once the OS is running, the SMI handler leaves the machine running and allows the OS to handle the power state. Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 80: Post Memory Manager Support

    All context is saved to the disk before the system reverts to the soft off state (S5). Upon a power button press or wakeup event the system will restore Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 81: Fail-Safe Bios Extensions

    ASM software to ensure that the system is running properly. If the system does not boot correctly or there is a system crash, the watchdog timer (WDT) times out and resets the system. Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 82: Paging Support

    BIOS reads the Pager Number String in NVRAM and uses it to dial out (this is set through the ASM software). GSM paging is not supported on this platform and paging is turned off by default. Paging is only supported through a modem add-in card. Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 83: Flash Memory Update Utility

    However, the first file in the list can be renamed, but all subsequent filenames must remain unchanged. Once an update of the system BIOS is complete, the system is automatically rebooted into the OS. Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 84: Error Handling, Messages & Beep Codes

    It is the responsibility of the BIOS SMI handler to present platform-specific errors, such as multi- bit ECC errors, as one of the standard bus errors, like parity error, to the OS NMI handler. Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 85: Isa Bus Error

    Table 57: Error handler action on PCI bus error Handler Action BIOS NMI Halt the system and disable NMI OS NMI Log the error and shut down the system BIOS SMI Log PCI errors Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 86: Processor Bus Error

    The CNB30LE does not report processor bus AERR# and BERR# error signals to the system. (AERR# indicates an address parity error and BERR# indicates an unrecoverable processor bus error.) Therefore, the system SMM handler does not log and report these types of errors to the Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 87: Memory Bus Error

    Processor Error The CPU generated an error. 8042 - Gate A20 Cannot switch to protected mode. Failure Processor Exception The CPU on the CPU Card generated an exception interrupt. Interrupt Error Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 88 Error in the first DMA channel. DMA 2 Error Error in the second DMA channel. FDD Controller Failure AMIBIOS cannot communicate with the floppy disk drive controller. Check all appropriate connections after the system is powered down. Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 89 XXXX is the hex address where the error occurred. Run AMIDiag to find and correct memory problems. Parity Error Parity error in system memory at an unknown address. Run AMIDiag to find and correct memory problems. Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 90: Bios Setup Program

    <F9> Setup Defaults: Load the default configuration values for all fields. A menu will appear asking the user to confirm. Press <Yes> to load defaults. Press <No> to cancel loading defaults. Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 91: Maintenance Menu

    30 seconds Primary IDE Master No options Displays ”Not Installed” Primary IDE Slave No options Displays ”Not Installed” Secondary IDE Master No options Reports name of device installed, otherwise displays ”Not Installed” Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 92: Advanced Menu

    Displays memory type for each bank or “Not Installed.” Bank 1 Bank 2 Bank 3 Table 68: Peripheral configuration submenu Feature Options Description Serial Port A Auto (default) Disables or enables serial port A. Disabled Enabled Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 93: Security Menu

    Table 70 shows the Boot menu. This menu sets boot features and the boot sequence. Table 70: Boot menu Feature Options Description Quiet Boot Disabled (default) “Disabled” displays normal POST messages. “Enabled” displays the OEM logo instead of POST messages. Enabled Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 94: System Management Menu

    ARMD-FDD ARMD-FDD = ATAPI removable device-floppy disk drive. ARMD-HDD Disabled Intel UNDI, PXE-2.0 (LAN 1) Intel UNDI, PXE-2.0 = Network boot using PXE. Intel UNDI, PXE-2.0 (LAN 2) AIC-7899 Channel B of the Onboard Adaptec SCSI 7899 AIC-7899 Channel A of the Onboard Adaptec SCSI 7899...
  • Page 95 See Table 72 for Options. Configures event log. Configuration Note: The LAN Console Redirection works with a client application. This client application will be released on the support.intel.com website for the SRMK2 server. Table 72: Event log configuration submenu Feature...

  • Page 96: Exit Menu

    Exits system setup without saving your changes in CMOS. Load Setup Defaults No options Loads setup defaults. Load Custom Defaults No options Loads custom defaults. Save Custom Defaults No options Save custom defaults. Discard Changes No options Discards changes. Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 97: Certification

    AS/NZS 3548, Class B Limit Japan VCCI Class B ITE (CISPR 22, Class A Limit). Taiwan BSMI, Class B (CISPR 22) Korea RRL, Class B (CISPR 22) Russia Gost Approval International CISPR 22, Class B Limit Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 98: Electromagnetic Compatibility Notices (Srmk2S)

    Only peripherals (computer input/output devices, terminals, printers, etc.) that comply with FCC Class A limits may be attached to this computer product. Operation with non-compliant peripherals is likely to result in interference to radio and TV reception. Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 99: Taiwan (Bsmi)

    However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 100: Fcc Declaration Of Conformity

    Phone: 1 (800)-INTEL4U or 1 (800) 628-8686 11.5.2 Taiwan (BSMI) The following BSMI Class B EMC Warning along with the BSMI ID number is located on the external left side chassis of the product. Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 101: Mandatory / Standard: Certifications, Registration, Declarations

    The system was tested per the Environmental & Reliability Board and System Validation Test Handbook, Intel Doc. #662394 Rev-04. These tests include: Temperature Operating and Non-Operating Humidity Non-Operating Shock Packaged and Un-packaged Vibration Packaged and Un-packaged AC Voltage, Freq. & Source Interrupt AC Surge Acoustics Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 102: Reliability And Serviceability

    Remove and replace fans Remove and replace riser card Remove and replace front panel board Remove and replace serverboard (with CPU, memory, riser card installed) Remove and replace DIMMs Remove and replace processor Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 103: Compatibility Testing

    13 Compatibility Testing At the time of this writing, validation of the SRMK2 Internet Server with third-party operating systems and hardware has not been completed. Please visit http://www.intel.com/isp to find an up-to-date compatibility test report. Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 104: Specifications And Customer Support

    14 Specifications and Customer Support 14.1 Online Support Find the latest information on the Intel ® SRMK2 Internet Server online at Intel’s site at http://www.intel.com/isp or http://support.intel.com. 14.2 Specifications Table 80 lists the specifications mentioned in this document. Table 80: Specification references...
  • Page 105 BIOS Writer’s Guide Call 1-800-548-4725 Guide Plug and Play Plug and Play BIOS Version 1.0a, May 5, 1994. Specification Compaq Computer Corporation, Phoenix Technologies Ltd., and Intel Corporation http://www.microsoft.com/hwdev/respec/pnpspecs.htm POST Memory POST Memory Version 1.01, November 21, 1997. Manager Manager (PMM) Phoenix Technologies Ltd.
  • Page 106 Revision 1.1, March 1996. Controller Interface Intel Corporation (UHCI) Design http://www.usb.org/developers/docs.html Guide Universal Serial Revision 1.1, September 23, 1998. Bus Specification Compaq Computer Corporation, Intel Corporation, Microsoft Corporation, and NEC Corporation http://www.usb.org/developers/docs.html Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 107 All output for this command will be hexadecimal bytes. An example of the ReadSEL command is shown in Figure 1 below. Note that to read the entire SEL, <X> should be set to 0 and <Y> should be set to a large number. Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 108 OS mostly shutdown (All but essential processes and services) GetLastSensor This code represents the last known state of the sensors as monitored by either OS instrumentation software and/or the BIOS. Possible values are: Unknown (default) Normal Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 109 Stop is a value representing the number of stop bits: 1 stop bit (default) 2 stop bits Dial is a value representing the dialing option: Tone (default) Pulse Connect is a value representing the connection mode: Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 110 Initialization String is an AT/Hayes Compatible string to send to the modem when paging or if Emergency Console connection mode is set to modem. Length is not to exceed 64 bytes and spaces are not allowed. GetPagerNum PutPagerNum <Pager Number String> Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 111 This is a string that represents the “dotted” IP subnet mask that should be used for the alert IP address. This string must be comprised of four 3-digit decimal values separated by periods. Intel ® SRMK2 Internet Server Technical Product Specification...

  • Page 112: Help Command

    <CR> (Enter key) to continue as shown in figure 5. After receiving the carriage return, the output screen is cleared and output continues from the top of the display. Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 113 Figure 27: Error example Security The BIOS Console can be password-protected to prevent unauthorized use. If a password is set, the BIOS Console will prompt for it before allowing the user to proceed. Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 114 If an incorrect password is entered, an error message is displayed followed by the password prompt. Error Password: Figure 29: Incorrect password Intel ® SRMK2 Internet Server Technical Product Specification...
  • Page 115 Intel ® SRMK2 Internet Server Technical Product Specification...

Table of Contents