Table of Contents
Advertisement
2.1.3 Front View of Chassis
The front bezel is a multiple -part plastic molding that contains the buttons, the LED indicator light
pipes, and a flip-down door that spans half the width of the bezel and folds down (right striated
portion in Figure 2 below). After pulling the flip door down the Power, Sleep, and Reset buttons
as well as the NMI pin hole are revealed. This also reveals the floppy and CD-ROM bays. See
Figure 3 for button placement. See Section 5 Front Panel Board for a complete description of the
buttons and LEDs.
Figure 2: Front view of chassis with bezel on
Additionally, the front bezel can be removed to reveal the front of the chassis. To access the hot
swappable SCSI hard disk drives, pivot the front panel out and to the right. Figure 3 shows the
chassis with the front bezel removed and the front panel in the closed position.
Figure 3: Front view of chassis without bezel
Upon pivoting the front panel out and to the right, the SCSI hard disk drive bays are revealed as
shown in Figure 4 below.
Intel ® SRMK2 Internet Server Technical Product Specification
14
Advertisement
Table of Contents
