Intel SRMK2 - Server Platform - 0 MB RAM Technical Specifications page 109

2 Sensor Threshold Non-Critical
3 Sensor Threshold Critical
4 Power Lost
GetReasonCode
This code represents the reason why the OS went down if known. Only applicable if Last Known
State is OS Going Down or OS Down. Possible values are:
0 Unknown or N/A (default)
1 User-requested reboot
2 User-requested shutdown
3 Automatic reboot
4 Automatic shutdown
GetSerialConfig
PutSerialConfig <Port> <Rate> <Flow> <Parity> <Data> <Stop> <Dial> <Connect>
These codes represent the direct serial or modem configuration.
Port is a value representing the COM port to be assigned to the serial or modem link:
0 Disabled
1 COM1
2 COM2
3 COM3 (default)
Rate is a value representing the speed of serial communication in bits per second:
0 9600 bits/second
1 19200 bits/second (default)
2 38400 bits/second
3 115200 bits/second
Flow is a value representing flow control:
0 None
1 CTS/RTS
2 XON/XOFF
3 CTS/RTS + CD (default)
Parity is a value representing port parity:
0 None (default)
1 Odd
2 Even
3 Reserved
Data is a value representing the number of data bits:
0 7 data bits
1 8 data bits (default)
Stop is a value representing the number of stop bits:
0 1 stop bit (default)
1 2 stop bits
Dial is a value representing the dialing option:
0 Tone (default)
1 Pulse
Connect is a value representing the connection mode:
Intel ® SRMK2 Internet Server Technical Product Specification
109