Password commands
EnablePassword <New Password> <Verification Password>
This command enables the password for access to the BIOS console. The New Password and
the Verification Password must be identical to enable the password. Maximum password length
is 20 characters and spaces are not allowed.
ChangePassword <Old Password> <New Password> <Verification Password>
This command changes the password for access to the BIOS console. The Old Password must
be identical to the current enabled password and the New Password and Verification Password
must match to change the password. Maximum password length is 20 characters and spaces are
not allowed.
DisablePassword <Old Password>
This command disables the password for access to the BIOS console. The Old Password must
be identical to the current enabled password to disable it. Maximum password length is 20
characters and spaces are not allowed.
Help command
Help
- This command will display the list of supported command with respective usage
and a brief description.
BIOS Console input/output formats
The BIOS Console will prompt for input on the command line at the bottom of the display. The
command line will be displayed in reverse video.
It will then accept input from the keyboard and echo all keystrokes to the display. Input cannot
exceed a single 80-character line of text including the command prompt. The keyboard and video
display will be redirected across a serial, modem, or LAN line. Commands are always terminated
by an ASCII carriage return <CR>. Output for each command, if defined, will occur starting on
the first line of the display and scrolling downward until the last output line is reached. At this
point, the user will be prompted on the last output line for a <CR> (Enter key) to continue as
shown in figure 5. After receiving the carriage return, the output screen is cleared and output
continues from the top of the display.
Intel ® SRMK2 Internet Server Technical Product Specification
112
Need help?
Do you have a question about the SRMK2 - Server Platform - 0 MB RAM and is the answer not in the manual?
Questions and answers