Calculating Power Consumption; Power Usage Worksheet 1 - Intel SPSH4 - Server Platform - 0 MB RAM Product Manual

Calculating Power Consumption

The total combined wattage for the system configuration must be less than the output of your power
supplies. Use the two worksheets in this section to calculate the power used by your system. For
current and voltage requirements of add-in boards and peripherals, see your vendor documents.
Calculating DC Power Usage
1. List the current for each board and device in the appropriate voltage level column.
2. Add the currents in each column. Then go to the next worksheet.
Table 22. Power Usage Worksheet 1
Device
Server board set
Primary Processor
Second Processor
Third Processor
Fourth Processor
Memory
PCI slot 1
PCI slot 2
PCI slot 3
PCI slot 4
PCI slot 5
PCI slot 6
PCI slot 7
PCI slot 8
st
1 3.5-inch hard disk drive
nd
2 3.5-inch hard disk drive
rd
3 3.5-inch hard disk drive
th
4 3.5-inch hard disk drive
th
5 3.5-inch hard disk drive
3.5-inch diskette drive
CD-ROM drive
nd
2 5.25-inch peripheral drive
rd
3 5.25-inch peripheral drive
Fans
Total Current
Equipment Log and Configuration Worksheets
Current (maximum) at voltage level:
+3.3 V +5 V 5 V Standby +12 V -12 V
163