Raising The Locking Bar; Installing Processors - Intel SPSH4 - Server Platform - 0 MB RAM Product Manual

2. Raise the locking bar on the socket.
3. Orient the processor so that the triangle on the corner of the processor aligns with the triangle
on the corner of the socket (Figure 16).
4. Aligning the pins of the processor with the socket, insert the processor into the socket. The
processor should drop into the socket without requiring any force.
5. Lower the locking bar completely.
Installing and Removing Components
Figure 15. Raising the Locking Bar
Figure 16. Installing Processors
OM13267
OM13268
79