Hot-Swap Scsi Drives; Checking A Hot-Swap Scsi Drive Status Indicator; Hot-Swap Scsi Drive Bay And Status Indicators; Led States For Hot-Swap Scsi Drive Status - Intel SPSH4 - Server Platform - 0 MB RAM Product Manual

Hot-Swap SCSI Drives

Hot-swap drives are installed in carriers that fit into the hot-swap drive bay. This section describes
the LED status indicators for the drive bays and gives instructions for using the drive carriers to
install and remove drives.

Checking a Hot-Swap SCSI Drive Status Indicator

Each hot-swap SCSI drive slot has an LED that indicates drive status (Figure 21). To view the
LEDs, open the front access door of the bezel.
Figure 21. Hot-Swap SCSI Drive Bay and Status Indicators
Table 7 lists the LED states and the drive status indicated by each state.
Table 7. LED States for Hot-Swap SCSI Drive Status
LED State
Solid green
Flashing green
Solid yellow
Flashing yellow
Off
Installing and Removing Components
B
A
A Front access door B
Status
The hard drive is present and powered on.
The hard drive is active.
There is an asserted fault status on the hard drive.
A rebuild of the hard drive is in progress.
The hard drive is not powered on.
OM13391
LED status indicators
85