Checking The Power Cords; Multiple Power Cords; Earth Grounded Socket-Outlets - Intel SPSH4 - Server Platform - 0 MB RAM Product Manual

Checking the Power Cords

WARNING
To avoid electrical shock, do not attempt to modify or use the supplied AC
power cord(s), if they are not the exact type required. If a power cord(s)
supplied is not compatible with the AC wall outlet in your region, get one
that meets the following criteria:
The power cord must be properly rated for the AC voltage in your region.
The power cord plug cap must have an electrical current rating that is at least
125% of the electrical current rating of the product.
The power cord plug cap that plugs into the wall socket-outlet must have a
grounding-type male plug designed for use in your region.
The power cord must have safety certifications for your region, and shall be
marked with the certification markings.
The power cord plug cap that plugs into the AC receptacle on the power
supply must be an IEC 320, sheet C13, type female connector.
In Europe, the power cord must be less than 4.5 meters (14.76 feet) long, and
it must be flexible <HAR> (harmonized) or VDE certified cordage to comply
with the chassis' safety certifications.
The power supply cord(s) is the main disconnect device to AC power. The
socket outlet(s) shall be near the equipment and shall be readily accessible
for disconnection.

Multiple Power Cords

WARNING
To avoid electrical shock, disconnect all AC power cords before accessing
inside the system.

Earth Grounded Socket-Outlets

WARNING
To avoid electrical shock, the system power cord(s) must be plugged into
socket-outlet(s) that is provided with a suitable earth ground. The system will
be provided with the following marking:
Connect only to properly earthed socket outlet.
Apparaten skall anslutas till jordat uttag när den ansluts till ett nätverk.
12 Intel SPSH4 Server Platform Product Guide