Installing And Removing Components; Tools And Supplies Needed; Access Covers - Intel SPSH4 - Server Platform - 0 MB RAM Product Manual

6 Installing and Removing Components

Tools and Supplies Needed

†
Phillips screwdriver
Small flat-bladed screwdriver
Extraction tool for processor heat sink clips:
Dexter Design
(503) 648-7000
dxtrdsgn@aol.com
Order part number: 650308-003-P6
Antistatic wrist strap and conductive foam pad (recommended)
Pen or pencil
Equipment log (page 161)
As you integrate new parts into the system, record the model and serial number of the server
system, all installed options, and any other pertinent information specific to the server system. You
will need this information when running the SSU.

Access Covers

This section includes instructions for the following:
Removing and installing the rear access cover
Removing and installing the front access cover
65