Before You Remove The Access Cover; Power Supply Modules; Fans; Electrostatic Discharge (Esd) - Intel SPSH4 - Server Platform - 0 MB RAM Product Manual

Before You Remove the Access Cover

WARNING
To avoid personal injury or property damage, the following safety
instructions apply whenever accessing inside the product:
Turn off all peripheral devices connected to this product.
Turn off the system by pressing the power button on the front of the product.
Disconnect the AC power by unplugging all AC power cords from the
system or wall outlet.
Disconnect all cables and telecommunication lines that are connected to the
system.
Retain all screws or other fasteners when removing access cover(s). Upon
completion of accessing inside the product, refasten access cover with
original screws or fasteners.
Do not access inside power supply. There are no serviceable parts in the
power supply. Return to manufacturer for servicing.

Power Supply Modules

CAUTION
Power supply modules have double-pole/neutral fusing.

Fans

WARNING
To avoid injury do not contact moving fan blades.

Electrostatic Discharge (ESD)

CAUTION
Perform the procedures in this chapter only at an electrostatic discharge
(ESD) workstation, because the server components can be extremely
sensitive to ESD. If no such station is available, you can reduce the risk of
electrostatic discharge ESD damage by doing the following:
Wear an antistatic wrist strap and attach it to a metal part of the server.
Touch the metal on the server chassis before touching the server components.
Keep part of your body in contact with the metal server chassis to dissipate
the static charge while handling the components.
Avoid moving around unnecessarily.
Hold the server components (especially boards) only by the edges.
Place the server components on a grounded, static-free surface. Use a
conductive foam pad if available but not the component wrapper.
Do not slide the components over any surface.
Important Safety Information 13