Accessing The System Boards; Removing The Access Cover To The System Boards; Installing The Access Cover To The System Boards - Intel SPSH4 - Server Platform - 0 MB RAM Product Manual

Accessing the System Boards

This section includes instructions for the following:
Removing and installing the access cover to the system boards
Removing and installing the memory board
Removing and installing the processor board air baffle
Removing and installing the processor board
Removing and installing the baseboard

Removing the Access Cover to the System Boards

To remove the access cover to the system boards:
1. Remove the rear access cover (page 66).
2. Loosen the two captive screws located at the front of the access cover to the system boards
(Figure 5).
3. Lift the end of the cover where the screws are located and remove the cover.
Figure 5. Removing the Access Cover to the System Boards

Installing the Access Cover to the System Boards

To install the access cover:
1. Orient the access cover with the captive screws toward the front of the server.
2. Insert the tabs on the rear of the cover into the slots at the rear of the chassis.
3. Press down gently and tighten the captive screws at the front of the cover.
68
OM13384
Intel SPSH4 Server Platform Product Guide