Page 1
Intel® Server System SC5650BCDP Technical Product Specification Intel order number: E80367-001 Revision 1.0 August 2009 Enterprise Platforms and Services Division – Marketing...
Page 2
® Revision History Intel Server System SC5650BCDP TPS Revision History Date Revision Modifications Number August 2009 Initial Release Intel order number: E80367-001 Revision 1.0...
Page 3
Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right.
Fan Configuration ....................30 Server Board Fan Control ..................30 Cooling Solution..................... 30 4.3.1 System Fan Connectors ..................31 5. Peripheral and Hard Drive Support................... 33 3.5-in Peripheral Drive Bay..................33 5.25-in Peripheral Drive Bays ................33 Intel order number: E80367-001 Revision 1.0...
Page 5
Other Markings ...................... 49 Appendix A: Integration and Usage Tips................50 Appendix B: POST Code Diagnostic LED Decoder ............... 51 Appendix C: POST Error Messages and Handling ..............55 Glossary............................. 60 Reference Documents ......................61 Revision 1.0 Intel order number: E80367-001...
Page 6
Figure 10. Turn On/Off Timing (Power Supply Signals).............. 26 Figure 11. PSON# Required Signal Characteristics ..............28 ® Figure 12. Cooling Fan Configuration for Intel Server Board S5500BC........31 Figure 13: Front View Components (without Front Bezel Assembly) ......... 33 Figure 14: Fixed Hard Drive Bay....................
Page 7
Table 27. PSON# Signal Characteristics ..................28 Table 28. PWOK Signal Characteristics ..................28 Table 29. CPU and System Fan Connector Pin-out ................ 32 Table 30: Front View Components Reference................33 Table 31. Control Panel LED Functions..................37 Revision 1.0 Intel order number: E80367-001...
Page 8
Table 37. Diagnostic LED POST Code Decoder ................ 52 Table 38. SEL Format for POST Error Messages ..............55 Table 39. POST Error Messages and Handling................55 Table 40. POST Error Beep Codes .................... 58 viii Intel order number: E80367-001 Revision 1.0...
Page 9
® Intel Server System SC5650BCDP TPS List of Tables < This page intentionally left blank. > Revision 1.0 Intel order number: E80367-001...
Intel server building blocks are used together, the fully integrated system will meet the intended thermal requirements of supported components. It is the responsibility of the system integrator who chooses not to use Intel developed server building blocks to consult vendor datasheets and operating parameters to determine the amount of air flow required for their specific application and environmental conditions.
2. Product Overview ® ® The Intel Server System SC5650BCDP is a 5U server system which integrates the Intel ® Server Board S5500BC into the Intel Server Chassis SC5650DP. The server system features are designed to support the high-density server market. This chapter provides a high-level overview of the system features.
Page 13
Fan Fault DIMM Fault CPU Fault 5V-STBY System State POST Code Diagnostics 600-W PFC Intel validated PSU with integrated cooling fan. Power Supply One tool-less, 120-mm chassis rear fan. Fans One tool-less 120-mm PCI fan. One tool-less 92-mm drive bay fan.
System Management System Views ® Figure 1. Intel Server System SC5650BCDP System Dimensions ® Table 2. Intel Server System SC5650BCDP Dimensions Height 17.8 Inches Width without rails 9.256 Inches Depth without CMA 19 inches Intel order number: E80367-001 Revision 1.0...
Table 3. Intel Server System SC5650BCDP Components Reference Description Description Control panel controls and indicators Two half-height 5.25-in peripheral drive bays Internal hard drive bay cage (behind door) Security lock USB ports(two) 120-mm system fan Revision 1.0 Intel order number: E80367-001...
The bezel also includes a key-locking door that covers the drive cage area permitting access to hot swap drives when a hot swap drive bay is installed. Server Board Overview ® The system integrates one Intel Server Board S5500BC. Intel order number: E80367-001 Revision 1.0...
RMM3 slot Slot 5, PCI Express* x8 Slot 6, PCI Express* x8 (Riser card) Slot 7, PCI Express* x8 Back panel I/O ports Diagnostic LEDs Status LED ID LED External Serial B header SATA Key Intel order number: E80367-001 Revision 1.0...
System fan 1 header DIMM sockets for Channels D and E (Supports CPU_2) SATA SGPIO SATA 0 SATA 1 SATA 2 2.7.2 Intel ® Light-Guided Diagnostic LED Locations ® Figure 6. Intel Light-Guided Diagnostic LED Locations Revision 1.0 Intel order number: E80367-001...
System Fan 3 Fault LED 5 VSB LED DIMM Fault LED System Fan 2 Fault LED CPU 1 Fan Fault LED CPU 2 Fan Fault LED System Fan 1 Fault LED DIMM Fault LED Intel order number: E80367-001 Revision 1.0...
ITE equipment. The power supply is tested as described in JEIDA MITI Guideline for Suppression of High Harmonics in Appliances and General-Use Equipment and meets the harmonic current emissions limits specified for ITE equipment. Revision 1.0 Intel order number: E80367-001...
® Power Sub-System Intel Server System SC5650BCDP TPS 3.1.1 Mechanical Overview Figure 7. Mechanical Drawing for Power Supply Enclosure Intel order number: E80367-001 Revision 1.0...
“Handle, knobs, grips, etc. held for short periods of time only.” 3.1.3 Output Cable Harness Listed or recognized component appliance wiring material (AVLV2), CN, rated min 105 ° 300Vdc is used for all output wiring. Revision 1.0 Intel order number: E80367-001...
3. INSTALL 1 TIE WRAP WITHIN 12MM OF THE PSU CAGE 4. MARK REFERENCE DESIGNATOR ON EACH CONNECTOR 5. TIE WRAP EACH HARNESS AT APPROX. MID POINT 6. TIE WRAP P1 WITH 2 TIES AT APPROXIMATELY 15M SPACING. Intel order number: E80367-001 Revision 1.0...
C Data Yellow Reserved N.C. Black 3.3RS Orange 3.1.3.5 P5-P8 Peripheral Power Connector Connector housing: AMP* 770827-1 or equivalent Contact: AMP* 61117-4, or equivalent Table 12. P5-P8 Peripheral Power Connector Signal 18 AWG Color Intel order number: E80367-001 Revision 1.0...
75VAC +/-5VAC range. The power supply starts up if the AC input is greater than 85VAC +/-4VAC. Application of an input voltage below 85VAC does not cause damage to the power supply, including a fuse blow. Revision 1.0 Intel order number: E80367-001...
AC line fuse to blow under any conditions. All protection circuits in the power supply do not cause the AC fuse to blow unless a component in the power supply has failed. This includes DC output load short conditions. Intel order number: E80367-001 Revision 1.0...
Operating AC Voltage Line Frequency Performance Criteria Continuous Nominal AC Voltages 50/60Hz No loss of function or performance 0 to ½ AC Mid-point of nominal AC No loss of function or performance 50/60Hz cycle Voltages Revision 1.0 Intel order number: E80367-001...
ReturnS signal. The remote sense input impedance to the power supply is greater than 200Ω. This is the value of the resistor connecting the remote sense to the output voltage internal to the power supply. Remote sense is able to regulate out a minimum of 200mV drop. Intel order number: E80367-001 Revision 1.0...
Maximum continuous load on the combined 12-V output shall not exceed 43 A. Peak total DC output power should not exceed 660 W. Peak power and peak current loading shall be supported for a minimum of 12 seconds. Revision 1.0 Intel order number: E80367-001...
Ripple / Noise The maximum allowed ripple/noise output of the power supply is defined in the following table. This is measured over a bandwidth of 10 Hz to 20 MHz at the power supply output connectors. Revision 1.0 Intel order number: E80367-001...
All main outputs must be within regulation of each msec vout_on other within this time. All main outputs must leave regulation within this msec vout_off time. * The 5VSB output voltage rise time shall be from 1.0 ms to 25 ms Intel order number: E80367-001 Revision 1.0...
AC or the PSON signal. Delay from 5VSB being in regulation to O/Ps being in sb_vout 1000 msec regulation at AC turn on. Time the 5VSB output voltage stays within regulation after 5VSB_holdup msec loss of AC. Revision 1.0 Intel order number: E80367-001...
AC power interruption. The power supply is not damaged from repeated power cycling in this condition. -12V and 5VSB are protected under over current or shorted conditions so that no damage occurs to the power supply. 5VSB will auto-recover after the OCP limit is removed. Intel order number: E80367-001 Revision 1.0...
5VSB will always remain on. The OTP circuit has a built- in hysteresis such that the power supply will not oscillate on and off due to a temperature recovering condition. The OTP trip level has a minimum of 4°C of ambient temperature hysteresis. Revision 1.0 Intel order number: E80367-001...
PWOK will be de-asserted to a LOW state. The start of the PWOK delay time is inhibited as long as any power supply output is within current limit. Table 28. PWOK Signal Characteristics Intel order number: E80367-001 Revision 1.0...
The FRU data format is compliant with the IPMI, version 1.0 specification. To find the most current version of these specifications you can go to http:\\developer.intel.com/design/servers/ipmi/spec.htm. 3.1.8.1 Device Address Locations The power supply device address location is as follows: Power Supply FRU Device Revision 1.0 Intel order number: E80367-001...
BMC control. The Intel Server Board S5500BC BMC controller may use the TMP75 ® sensor to adjust fan speeds according to air intake temperatures. Refer to the Intel Server Board S5500BC Technical Product Specification for configuring information. Server Board Fan Control ®...
CPU cooling must be installed. ® Active heatsinks for CPUs incorporate a fan to provide cooling. The Intel Server System SC5650BCDP is engineered to work with processors that have an active heatsink solution.
GROUND is the power supply ground. Power Power supply 12 V. Fan Tach FAN_TACH signal is connected to the BMC to monitor the fan speed. Fan PWM FAN_PWM signal to control the fan speed. Intel order number: E80367-001 Revision 1.0...
5.25-in Peripheral Drive Bays ® Intel Server System SC5650BCDP supports two half-height 5.25-in removable media peripheral devices, such as a magnetic/optical disk, DVD/CD-ROM drive, or tape drive. These Revision 1.0 Intel order number: E80367-001...
3.5-in x 1-in hard drives. Power requirements for each individual hard drive may ® limit the maximum number of drives that can be integrated into an Intel Server System SC5650BCDP. The drive bay is designed to allow adequate airflow between drives, and no additional cooling fan is required.
Both backplanes (expanded and non-expanded) have a connector to accommodate a SAF-TE controller on an add-in card. Each backplane type supports up to six 1-in hot swap drives when mounted in the docking drive carrier. Revision 1.0 Intel order number: E80367-001...
The control panel buttons and LED indicators are displayed in the following figure. The Entry ® Ebay SSI (rev 3.61) compliant front panel header for Intel server boards is located on the back of the front panel. This allows for connection of a 24-pin ribbon cable for use with SSI rev 3.61- compliant server boards.
System ready (not supported by all server boards) BLINK Processor or memory disabled Amber Critical temperature or voltage fault; CPU/Terminator missing BLINK Power fault; Fan fault; Non-critical temperature or voltage fault Fatal error during POST Revision 1.0 Intel order number: E80367-001...
Server Board S5500BC provides a connector (J3C1) to support a RMM3 card. The RMM3 card provides the Integrated BMC with an additional dedicated network interface. The dedicated interface uses a separate LAN channel. The RMM3 provides additional flash storage for advanced features such as the WS-MAN. Intel order number: E80367-001 Revision 1.0...
5 Hz to 500 Hz, 2.20 g RMS random Shock, operating Half sine, 2 g peak, 11 mSec ESD* +/-15 KV except I/O port +/-8 KV per the Intel Environmental test specification System Cooling 2550 BTU/hour Requirement in BTU/Hr * IMPORTANT NOTES: ®...
Kassera använt batteri enligt fabrikantens instruktion. VAROITUS Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan laitevalmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden mukaisesti. Intel order number: E80367-001 Revision 1.0...
Updated product information for configurations can be found on the Intel Server Builder Web site at http://www.intel.com/go/serverbuilder. If you do not have access to Intel’s Web address, please contact your local Intel representative. Server chassis (base chassis is provided with power supply and fans)⎯UL listed.
TV reception. All cables used to connect to peripherals must be shielded and grounded. Operation with cables, connected to peripherals that are not shielded and grounded may result in interference to radio and TV reception. Intel order number: E80367-001 Revision 1.0...
Interference (VCCI) from Information Technology Equipment. If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual. Revision 1.0 Intel order number: E80367-001...
˙Ø¿ ˇ´ £‹¿ ˜—Ł “ ˆ»§¶ ˘ ‚ ¨¯† ¨¡¿ —— ˜·º˚' ¡£ Product Ecology Compliance Intel has a system in place to restrict the use of banned substances in accordance with world wide product ecology regulatory requirements. The following is Intel’s product ecology compliance criteria.
Not applied to internal packaging such as plastics, foams, etc. Intel Internal All materials, parts and subassemblies must not Specification contain restricted materials as defined in Intel’s Environmental Product Content Specification of None Required Suppliers and Outsourced Manufacturers – http://supplier.intel.com/ehs/environmental.htm...
Page 58
German Green Dot Applied to Retail Packaging Only for Boxed Boards Intel Internal All materials, parts and subassemblies must not Specification contain restricted materials as defined in Intel’s Environmental Product Content Specification of None Required Suppliers and Outsourced Manufacturers – http://supplier.intel.com/ehs/environmental.htm International ISO11469 - Plastic parts weighing >25gm are...
“Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan.” English on line 4: “Connect only to a properly earth grounded outlet.” Country of Origin Logistic Requirements Applied to products to indicate where product was Made in XXXX made. Revision 1.0 Intel order number: E80367-001...
Intel Server System SC5650BCDP TPS Appendix A: Integration and Usage Tips ® This section provides a list of useful information unique to the Intel Server System SC5650BCDP that you should keep in mind while integrating the server system. ® The Intel Server System SC5650BCDP requires the use of a shielded LAN cable to •...
LED #6 LED #5 LED #4 LED #3 LED #2 LED #1 LED #0 Status Upper nibble bits = 1010b = Ah; Lower nibble bits = 1100b = Ch; the two are concatenated as ACh. Revision 1.0 Intel order number: E80367-001...
Programming timing parameters in the memory controller 0x25h Configuring memory parameters in the memory controller 0x26h Optimizing memory controller settings 0x27h Initializing memory, such as ECC init 0x28h Testing memory PCI Bus 0x50h Enumerating PCI buses Intel order number: E80367-001 Revision 1.0...
Page 63
0xBCh Enabling / configuring a removable media device Boot Device Selection (BDS) 0xD0 Trying to boot device selection 0 0xD1 Trying to boot device selection 1 0xD2 Trying to boot device selection 2 Revision 1.0 Intel order number: E80367-001...
Page 64
Crisis recovery has been initiated because of a user request 0x31h Crisis recovery has been initiated by software (corrupt flash) 0x34h Loading crisis recovery capsule 0x35h Handing off control to the crisis recovery capsule 0x3Fh Unable to complete crisis recovery capsule Intel order number: E80367-001 Revision 1.0...
Major 0141 PCI resource conflict Major 0146 PCI out of resources error Major 0192 Processor 0x cache size mismatch detected. Fatal 0193 Processor 0x stepping mismatch. Minor 0194 Processor 0x family mismatch detected. Fatal Revision 1.0 Intel order number: E80367-001...
Page 66
® Appendix C: POST Error Messages and Handling Intel Server System SC5650BCDP TPS Error Code Error Message Response 0195 Processor 0x Intel(R) QPI speed mismatch. Major 0196 Processor 0x model mismatch. Fatal 0197 Processor 0x speeds mismatched. Fatal 0198 Processor 0x family is not supported.
Page 67
Serial Port component encountered an input error. Minor 92C8 Serial Port component encountered an output error. Minor 94C6 LPC component encountered a controller error. Minor 94C9 LPC component encountered a resource conflict error. Major Revision 1.0 Intel order number: E80367-001...
Power fault: DC Power unit sensors – power unit failure offset. power unexpectedly lost (power good dropout) 1-5-4-4 Power control fault Power unit sensors – soft power control failure offset. (Power good assertion timeout) Intel order number: E80367-001 Revision 1.0...
Page 69
The user can override this option by setting the POST Error Pause option as disabled on the BIOS setup Main screen. If this option is disabled, the system boots the operating system without user intervention. The default is disabled. Revision 1.0 Intel order number: E80367-001...
Mean Time to Repair Over-temperature Protection Over-voltage Protection Power Factor Correction Power Supply Unit Ring Indicate Single Connector Attachment Sensor Data Record Single-Ended UART Universal Asynchronous Receiver Transmitter Universal Serial Bus VCCI Voluntary Control Council for Interference Intel order number: E80367-001 Revision 1.0...
Need help?
Do you have a question about the E80367-001 and is the answer not in the manual?
Questions and answers