Intel SPSH4 - Server Platform - 0 MB RAM Product Manual page 159

Table 21. Error Messages and Codes (Continued)
Code Error Message
0BD0: 1st SMBus device address not acknowledged.
0BD1: 1st SMBus device Error detected.
0BD2: 1st SMBus timeout.
Expansion ROM not initialized.
Invalid System Configuration Data
System Configuration Data Read Error
Resource Conflict
System Configuration Data Write error
Warning: IRQ not configured
8503: Incorrect memory speed in location: XX, XX, ...
Error Messages and Error Codes
Failure Description
Some SMBus device (chip) failed
Some SMBus device (chip) failed
Some SMBus device (chip) failed
PCI Expansion ROM card not initialized
System configuration data destroyed
System configuration data read error
PCI card resource is not mapped
correctly.
System configuration data write error
PCI interrupt is not configured correctly.
Non-PC200 DIMMs have been installed
in slots XX, XX, ...
159