Norton Personal Firewall - Cisco CCNA NETWORK SIMULATOR Manual

Norton Personal Firewall

™
Upon launching the Cisco CCNA Network Simulator, the Norton™ Personal Firewall (if installed)
might appear with a similar window to this one:
You must select the "Always allow connections to this program on all ports" pull down option, and then
click the Ok button. This will give the program access to establish Telnet sessions. If you desire to play
with the "Manually configure Internet access" option, you must configure to permit loopback IP 127.0.0.1
on Telnet port 23.
The above third-party programs were tested only so far as basic compatibility for use with the advanced
features of the Cisco CCNA Network Simulator. No other testing was completed.
75
© 2004 Boson Software, Inc. All Rights Reserved.