Validate Tab - Novell ADMINSTUDIO 9.5 User Manual

Chapter 13: Identifying and Resolving Application Conflicts Using ConflictSolver
ConflictSolver Reference
Table 13-92 • Resolution Tab Properties (cont.)
Option
Preview and approve
all resolutions
Maximize user
flexibility in selecting
resolutions

Validate Tab

From the Validate tab of the Options dialog box, you can configure the following properties:
Table 13-93 • Validate Tab Properties
Option
Suppress
Warnings/Info
1236
Description
Select this option if you want to review and approve the suggested resolution for
each conflict before ConflictSolver performs any resolutions. When the conflict
detection process is completed, the
listing the conflicts that were found and the CARDs that could be used to resolve
these conflicts. Before ConflictSolver will continue resolving these conflicts, each
conflict resolution must be approved. See
information.
Some CARDs can resolve a conflict in more than one way. For example,
checks whether the executable module within the component is the key file, and
accumulates a list of potential files to be used for the key file. If this option is
selected, this list of files is displayed on the
and you are prompted to select which file to use. If this option is not selected, the
CARD will perform its default resolution.
Description
When these boxes are checked, the messages of that type will not be displayed in the
Validate tab of the Output Window during validation. It is strongly recommended you do
not suppress warning messages so you can ensure proper validation of packages
before importing them into ConflictSolver.
Resolution Details Dialog Box
Conflict Resolution Process
CARD Resolution Options Dialog
ADS-0950-UG00 AdminStudio 9.5 User Guide
is displayed,
for more
ACE06
Box,