About Flexwrap License Parameters; Specifying Flexwrap License Parameters - Novell ADMINSTUDIO 9.5 User Manual

Chapter 21: License-Enabling Packages Using FLEXwrap
Managing FLEXwrap License Files
Table 21-17 • FLEXwrap Terminology (cont.)
Term
Wrapper

About FLEXwrap License Parameters

This section lists the field name and explanation of each license parameter, and includes an example of a license
file using each of these parameters. It also includes a list of all of the possible elements of a FLEXwrap
•

Specifying FLEXwrap License Parameters

•
Understanding FLEXwrap License File FEATURE Lines
Specifying FLEXwrap License Parameters
To generate FLEXwrap licenses, you use the
following table lists the field name and explanation of each license parameter.
Table 21-18 • FLEXwrap License Parameters
Parameter
Application
Program
1660
Description
The FLEXwrap binary which is run when an end user attempts to run a wrapped
application:
swrap_nt.exe (GUI apps)
or
swrap_ntc.exe (console apps)
The Wrapper requests a license from the License Server and runs the wrapped
application if a license is obtained or if license failsafe mode or License Server failsafe
mode is enabled.
Description
This parameter must be identical (including case and excluding
to be wrapped. It must conform to FLEXwrap feature-naming rules, including:
•
The name must be <= 30 characters.
• The name must start with either a letter, a number, or an underscore "_".
This will appear after the word
program and specify parameters using a
swsetup32
on the
FEATURE FEATURE
ADS-0950-UG00
FEATURE
) to the name of the binary
.exe
line.
AdminStudio 9.5 User Guide
line.
FEATURE
line. The