Unpublished Packages Dialog Box - Novell ADMINSTUDIO 9.5 User Manual

Table 14-20 • Test Result Filter Editor Dialog Box
Option
Filter Severity
Description
Save

Unpublished Packages Dialog Box

This dialog box opens if you attempt to exit PackageExpert before you have published test results to the
Application Catalog for those packages whose Test Results mode is set to Catalog.
Select those packages in the Packages list for which you want to save test results to the Application Catalog, and
click OK.
AdminStudio 9.5 User Guide
Chapter 14: Identifying and Resolving Package Errors Using PackageExpert
Description
Select one of the following options to filter this message:
•
Error—Select to identify this test result as a problem that would cause incorrect
behavior when this package is installed or used.
• Warning—Select to identify this test result as a problem that could cause
incorrect behavior when this package is installed or used.
•
Information—Select to indicate that this test result is not an error.
•
Exclude—Select to exclude the display of this test result.
After you have set this filter, if the same problem is encountered in another package
or in a subsequent test run of this package, the filter that you defined will continue to
be used.
Enter an explanation for why you changed the severity level or excluded this
message
Click to save the filter.
ADS-0950-UG00
PackageExpert Reference
1315