Isolating Applications Using Application Isolation Wizard - Novell ADMINSTUDIO 9.5 User Manual

Isolating Applications Using
Application Isolation Wizard
Application isolation is one solution to component versioning conflicts. Isolation reduces versioning conflicts by
modifying an application so it always loads the versions of components—such as DLLs—with which it was
originally developed and tested.
Application Isolation Wizard user documentation is presented in the following sections:
Table 16-1 • Application Isolation Wizard User Documentation
Section
About Application
Isolation Wizard
Launching the
Application Isolation
Wizard
Isolation Methods
Assemblies
Manifests
Digital Signatures
Isolating Applications
Setting Assembly
Naming Conventions
AdminStudio 9.5 User Guide
Description
Explains the reasons you would isolate applications and introduces you to the
Application Isolation Wizard.
Explains how to open the Application Isolation Wizard from the AdminStudio
interface.
Describes the two isolation methods used by Application Isolation Wizard:
Manifests and Assemblies, and Windows Installer Isolated Components.
Explains how Assemblies are used.
Explains how Manifests are used.
Explains how Digital Signatures are used.
Describes how to use the Application Isolation Wizard to isolate applications.
Explains assembly naming conventions.
ADS-0950-UG00
16
1345