Command-Line Options; Configuration Files - Novell ADMINSTUDIO 9.5 User Manual

Chapter 16: Isolating Applications Using Application Isolation Wizard
Application Isolation Wizard Reference

Command-Line Options

The Application Isolation Wizard can also be run from the command line. You can specify the following options
when running the AIW.exe executable from the command line:
Table 16-9 • Application Isolation Wizard Command-Line Options
Option
-?
-version
-i <configuration
file>
-p <package name>

Configuration Files

When using the command-line options for the Application Isolation Wizard, you can specify an INI file for
configuration using the
[IsolationMethods]
Manifests=1
IsolatedComponents=1
[DigitalSignature]
CertificateFile=
SPCFile=
PVKFile=
CertificateName=
TimeStampAssemblies=
[Manifest]
AssemblyType=0
Company="Company"
Division="Division"
NewComponents=0
Each configuration corresponds to a user interface setting in the Application Isolation Wizard, as described below:
Table 16-10 • Configuration File Settings
INI File
Manifests
1362
Description
Displays command-line help for the Application Isolation Wizard.
Displays the version of AdminStudio.
Allows you to specify a configuration file for Application Isolation Wizard settings.
The default file, AIWConfig.ini, is located in <AdminStudio Directory>\Common and
can be used as a model. This parameter is optional.
The name and location of the package or merge module which includes
applications you want to isolate. This parameter is mandatory.
parameter. This file should take the following format:
-i
UI Setting
Use manifests for isolation option on
Isolation Method panel
Explanation
Set this value to 1 to use manifests.
Manifests only work with Windows XP .
ADS-0950-UG00 AdminStudio 9.5 User Guide