Novell ADMINSTUDIO 9.5 User Manual page 1166

Chapter 13: Identifying and Resolving Application Conflicts Using ConflictSolver
Application Conflict Evaluators (ACEs)
Source.ComponentId <> Target.ComponentId AND Source.csFullPath = Target.csFullPath AND
Source.KeyPath = Target.KeyPath
Summary
Table 13-42 • ACE30 Summary
Topic
Conflict Type:
Description:
Result:
Resolution Type:
Result:
ACE31
The MoveFileData ACE checks to see if data exists in the MoveFile MSI table that is not being executed with an
associated MoveFiles action.
The package contains data ([FileKey]) in the 'MoveFile' table but not the necessary actions to use
this data. You should consider whether a 'MoveFiles' action is needed for your
'InstallExecuteSequence' table.
Summary
Table 13-43 • ACE31 Summary
Topic
Conflict Type:
Description:
Result:
Resolution Type:
1166
Description
Conflict Rule / Components
Checks for KeyPath conflicts across components. It identifies components with different
ComponentIDs installing the same key file to the same directory.
If components with different ComponentIDs installing the same key file to the same
directory is identified, a warning is generated.
Manual
If a product component is installing a KeyPath file which is also being installed by a
product with a different Component Id, the KeyPath ACE fails.
Description
Best Practice Rule / Recommended Rules
Checks to see if data exists in the MoveFile MSI table that is not being executed with an
associated MoveFiles action.
If a package contains data in the MoveFile table but not the necessary actions to use
this data, a warning is generated.
Manual
ADS-0950-UG00 AdminStudio 9.5 User Guide