Qualitymonitor Reference; Menus And Toolbar - Novell ADMINSTUDIO 9.5 User Manual

Chapter 17: Ensuring Package Quality Using QualityMonitor

QualityMonitor Reference

Note • When using any -sn or -sb command line options, you can specify the target product using the existing
options /c or /f.
•
If you use the /f option to specify the product, the input file will be modified with the test results.
•
If you use /c to specify the target product, /f options must be used to specify the project file path which will have
the test results.
• If both /c and /f parameters are specified, then QualityMonitor gives preference to /c and operates with the
product code specified by /c.
QualityMonitor Reference
Topics contained in this section provide detailed reference on each user interface element, dialog box, or view in
QualityMonitor. This is the same documentation displayed when you click F1 from the QualityMonitor interface.
Topics are organized as follows:
•

Menus and Toolbar

•
QualityMonitor Interface
•
Dialog Boxes
• Views
Menus and Toolbar
The following table provides a description of each of QualityMonitor's menu commands and toolbar buttons:
Table 17-6 • QualityMonitor Menus and Toolbar Options
Menu
File
File
File
File
1398
Toolba
r
Command Button
Open
Close
Save
Save As
Keyboar
d
Shortcut Description
Ctrl+O Allows you to open an existing QualityMonitor project
file (.iqm) or create a new one based on an installed
MSI-based application.
Closes the current project.
Ctrl+S Saves the current project.
Saves the current project using the name and
location you specify.
ADS-0950-UG00 AdminStudio 9.5 User Guide