Novell ADMINSTUDIO 9.5 User Manual page 1470

Chapter 18: Preparing Packages for Distribution Using Distribution Wizard
Reference
Use this panel to login to the server location where you want to create the Distribution Object. Enter the following
options:
Table 18-24 • ZENworks Login Panel Options
Option
Login Name
Password
Server
Context
SSL Port
Number
Note • All of these entries except the password are saved and will pre-populate these fields the next time you
access this panel.
Specifying Multiple Parameters in the Login Name and Context Fields
The entries that you make in the Login Name and Context fields are concatenated to form the Novell distinguished
name. If you enter
AdminStudio would pass to the server would be:
cn=jsmith, o=myorg
1470
Description
Enter a valid Login Name for the Novell server where you want to create the Distribution
Object. This is a required field. For more information, see
in the Login Name and Context
Enter a valid password for the specified Login Name.
Enter the machine name or IP address of the Novell server where you want to create the
Distribution Object.
Enter the Novell environment where you want to create the Distribution Object. Because
you can choose to define the context information in the Login Name field, this field is
optional. For more information, see
and Context Fields.
Specify the secure port to connect to ZENworks. The default/recommended port value is
636.
in the Login Name field and
jsmith
Fields.
Specifying Multiple Parameters in the Login Name
in the Context field, the login information that
myorg
ADS-0950-UG00
Specifying Multiple Parameters
AdminStudio 9.5 User Guide