Table of Contents
Advertisement
Chapter 12: Customizing Installations Using Tuner
Working with Dialogs
Note •
This procedure assumes the original Windows Installer setup was created using InstallShield Editor. If
another setup authoring application was used, the names of dialogs and properties may not be the same. The same
general procedure still applies.
Task:
To use a transform to disable a custom setup:
1.
Select Dialogs from the checklist. The Dialogs View opens.
2.
Using the Installation Mode list, select the UI sequence containing the SetupType dialog. Typically, this is only
in the Installation Sequence.
3.
Select the SetupType dialog from the Dialogs list and click Hide.
4.
When the Dialog Properties dialog box appears, change the ADDLOCAL value to ALL.
5.
Click OK to dismiss the dialog.
6.
Select the CustomSetup dialog from the Dialogs list and click Hide.
7.
When the Dialog Properties dialog box opens, change the _BrowseProperty value to INSTALLDIR.
8.
Click OK to dismiss the dialog.
When an end user runs the installation using this transform, the user will not have the option to perform a custom
setup.
Editing Dialog Properties
Task:
To edit properties for a UI sequence dialog:
1.
Select Dialogs from the checklist. The Dialogs View opens.
2.
Using the Installation Mode list, select the UI sequence containing the dialog box containing properties you
want to edit.
3.
From the Dialogs list, select the appropriate dialog.
4.
Click Properties. The Dialog Properties dialog box opens.
Note •
properties.
5.
From the Dialog Properties dialog box, double-click the value cell for the property you want to edit.
6.
Change the property value as necessary, and click OK.
1038
The Properties button is only enabled when you have selected a dialog box containing editable
ADS-0950-UG00
AdminStudio 9.5 User Guide
Advertisement
Table of Contents
Troubleshooting
