Zenworks Server Distribution/Distributor Panel - Novell ADMINSTUDIO 9.5 User Manual

However, if you enter multiple unqualified parameters in the Context field, AdminStudio uses a formula to
determine how to pass these parameters to the server:
Table 18-30 • How to Specify Multiple Parameters in the Context Field
If you enter ...
one unqualified parameter in the Context
field, such as:
myorg
two unqualified parameters in the Context
field, such as:
dept01, myorg
more than two unqualified parameters in
the Context field, such as:
dept01, office03, myorg
Caution •

ZENworks Server Distribution/Distributor Panel

AdminStudio 9.5 | Distribution Wizard
When you select the ZENworks Server Distribution method from the Distribution Type panel, this panel is
displayed after the ZENworks Server Distribution/Object panel. On this panel, you specify the Distributor
Object for the Distribution Object that you are creating.
This panel includes the following options:
Table 18-31 • ZENworks Server Distribution/Distributor Panel Options
Option
Context
AdminStudio 9.5 User Guide
If the above formulas do not accommodate your data, always use fully qualified naming.
Description
Enter the Novell environment where you want to create this Distributor Object.
You can enter multiple context parameters in this field. See
Parameters in the Context
ADS-0950-UG00
Chapter 18: Preparing Packages for Distribution Using Distribution Wizard
AdminStudio assumes that ...
The following parameter is passed to the server:
o=myorg
•
the first entry identifies an organizational unit (
•
the second entry identifies the organization parameter (
Therefore, the following parameters are passed to the server:
ou=dept01, o=myorg
•
the last entry identifies the organization parameter (
•
all previous entries are assumed to be identifying
organizational units (
Therefore, the following parameters are passed to the server:
ou=dept01, ou=office03, o=myorg
Field.
)
ou
Specifying Multiple
Reference
)
ou
)
o
)
o
1475