Novell ADMINSTUDIO 9.5 User Manual page 1676

Chapter 21: License-Enabling Packages Using FLEXwrap
Managing FLEXwrap License Files
Table 21-25 • FLEXwrap Application Information Dialog Box Options—Advanced View (cont.)
Option
Connect timeout
Terminate signal
Deny loading
application on
license failure
1676
Description
If the License Server becomes unavailable (due to a License Server node failure, a
License Server process failure, or a network communication problem), the
application will lose its license.
The Wrapper will attempt to regain its license until the timeout (or exit) period
elapses. By default, there is no timeout (or exit) period, so the application will
continue to run without a license and will continue to attempt to regain its license
indefinitely.
If you specify a Connect timeout period, the wrapped application will continue to
run for the specified amount of time while the Wrapper attempts to regain its license.
The Wrapper will give periodic warnings to the user. For example, if you set the
timeout to ten minutes, the user will get ten messages like this:
Lost license for feature.
Reconnection attempt n of 10.
If a license can be obtained before the timeout period ends, the user will see
Reacquired feature license
been obtained, the application will exit with the message
Some applications require a special shutdown signal in order to perform application-
specific cleanup. FLEXwrap will normally send a
application requires a different signal, you can specify it in this parameter. For
example, will leave the terminal in "raw" mode unless it receives a
vi
By default, the Deny loading application on license failure option is selected.
•
Run when no license is available—If you want the wrapped application to be
able to run whether or not it can get a license from a running FLEXwrap License
Server (License Failsafe Mode), clear the Deny loading application on
license failure option. See
• Run when cannot connect to License Server—If you want the wrapped
application to be able to run whether or not the FLEXwrap License Server is
running (License Server Failsafe Mode), clear the Deny loading application
on license failure option and follow the instructions in
Server Failsafe Mode.
•
Cannot run without a license—If you wish to require the Wrapper to obtain a
license in order to run the wrapped application, select the Deny loading
application on license failure option
. If the timeout period is reached and a license has not
SIGHUP
Setting Up Regular (License) Failsafe
ADS-0950-UG00
Lost license. Exiting
to the application, but if the
.
SIGHUP
Mode.
Setting Up License
AdminStudio 9.5 User Guide
.