Novell ADMINSTUDIO 9.5 User Manual page 1290

Chapter 14: Identifying and Resolving Package Errors Using PackageExpert
Adding Manual Tests
Task: To run this test:
1. Click Configuration in the PackageExpert toolbar. The Configuration view opens.
Note •
Filter. If Configuration is not displayed, click the arrow next to the menu item and select Configuration from
the list.
2. Select the manual test that you want to run and resolve.
3. Return to the Test & Resolve view and open a package in PackageExpert.
4. Select the Desktop Icons node and select Perform Manual Test from the context menu. The Manual Test
Perform dialog box opens, listing the manual steps you need to perform to run this manual tests.
5. Perform each of the steps, and mark each as Pass or Fail after you have performed it by clicking on the step
and selecting Pass or Fail from the menu.
6. Click Save.
Resolving a Manual Test
When performing a manual test, you mark the Status of each step as either Pass, Fail, or Pending. If you have
set the status of any of the steps to Fail, and none of the steps are still in Pending status, the Resolve Manual
Test selection on the context menu is enabled, and you can proceed with resolution.
1290
The second menu item in the PackageExpert toolbar toggles between Configuration, Options, and
ADS-0950-UG00 AdminStudio 9.5 User Guide