Novell ADMINSTUDIO 9.5 User Manual page 1143

Table 13-19 • ACE07 Summary
Topic
Result:
Resolution Type:
Resolution:
ACE08
ACE08 identifies components with identical ComponentIds, and checks those components to see if the versions of
the files in each component match. The ACE08 Error String is displayed in the following format:
The file [FILENAME], version [VERSION_NUMBER1], in the component [COMPONENT1] conflicts with the
same file, version [VERSION_NUMBER2], in the component [COMPONENT2].
Note • ACE08 is a warning, not an error.
Summary
Table 13-20 • ACE08 Summary
Topic
Conflict Type:
Description:
Result:
Resolution Type:
Resolution:
AdminStudio 9.5 User Guide
Chapter 13: Identifying and Resolving Application Conflicts Using ConflictSolver
Description
ACE07 reports four types of errors, depending on the various combinations of source
and target files and whether or not they originated in a merge module. (See table
above.)
Automatic (CARD07) only if both the source and target files originated in a Merge
Module. For all other errors, confirm the error by running the package against
and then, based upon the results, decide how to proceed.
The Source package ComponentId is changed to match the Target package
Component Id.
Description
Conflict Rule / Files
Identifies components with identical ComponentIds, and checks those components to
see if the versions of the files in each component match.
If components with identical ComponentIds contain files with different versions, ACE08
fails.
Manual
Change the file versions to match those of the Target component, or change the file
versions in the Source component.
ADS-0950-UG00
Application Conflict Evaluators (ACEs)
ACE12
1143