Ftp Location Panel; Landesk Integration Panel - Novell ADMINSTUDIO 9.5 User Manual

Hide thumbs Also See for ADMINSTUDIO 9.5:

Table of Contents

Table 18-14 • AltirisTemplate.config Variables (cont.)

%SUMMARYSTREAM.Id%

Please note the following:

Any property with the DIST prefix will be custom populated by the Distribution Wizard.

Any other property will be populated based on the MSI Property Table.

Typically, all variables are enclosed within '%' characters, as shown above.

FTP Location Panel

This panel is displayed when you select FTP Location as the distribution method from the Distribution Type

panel. The installation will be upload to the FTP server specified in the FTP Location field. If necessary, provide a

user name and password for the FTP server.

AdminStudio 9.5 | Distribution Wizard

With LANDesk distribution, the MSI package along with all the setup files are copied to a network location.

If you select LANDesk on the Distribution Type panel, the LANDesk Integration panel is displayed.

Specify the following options on the LANDesk Integration panel:

Table 18-15 • LANDesk Integration Panel Options

Network Directory or URL

AdminStudio 9.5 User Guide

Chapter 18: Preparing Packages for Distribution Using Distribution Wizard

Comments property from the MSI Summary Stream.

Any property with the SUMMARYSTREAM prefix will be populated based on

the MSI Summary Information Stream Property as specified by the Id, in the

<description>%SUMMARYSTREAM.4%</description>

Summary Stream Ids range from 1 to 19. For a complete list of Summary

Information Stream Ids, see

the example above, "4" indicates that the value of the Author property should

be inserted.

Specify the network location where you want to copy the MSI package and all

of its setup files. The Network Directory could be a URL or a UNC path. This

field will default to the last used path, and will provide a most recently used list.

ADS-0950-UG00

Summary Information Stream Property