Manually Setting Test Item Status; Filtering Test Case Data - Novell ADMINSTUDIO 9.5 User Manual

Chapter 17: Ensuring Package Quality Using QualityMonitor
Working with Test Cases

Manually Setting Test Item Status

You can manually set the status of an individual Test Item to Passed, Failed, or Pending.
Task: To manually set the status of an individual Test Item:
1. Create or open a QualityMonitor project. The QualityMonitor Product Information View opens and a view of
Test Items is displayed.
2. Under Deployment Tests, select one of the following tests to open its corresponding View:
•
Class IDs
• File Associations
• Help Files
• Prog IDs
• Services
• Shortcuts
• Type Libraries
• ODBC Data Sources
•
ODBC Drivers
3. Right-click on the Test Item, point to Set Status, and select the status from the Set Status submenu: All,
Pending, Passed, or Failed.

Filtering Test Case Data

On the Product Information View, you can choose to display only those Test Cases with a selected status:
Pending, Passed, or Failed.
Task: To filter the displayed data in a Test Case:
1. Create or open a QualityMonitor project. The QualityMonitor Product Information View opens and a view of
Test Items is displayed.
2. Under Deployment Tests, select one of the following tests to open its corresponding View:
•
Class IDs
•
File Associations
•
Help Files
•
Prog IDs
1374 ADS-0950-UG00 AdminStudio 9.5 User Guide