Novell ADMINSTUDIO 9.5 User Manual page 1657

Figure 21-9: License Server Failsafe Mode
Perform the following steps to ensure License Server failsafe.
Task: To ensure License Server failsafe:
1. Make sure you specified failsafe mode when you generated the
FEATURE
add these words to an existing
FLEX-Enabling an Executable (.exe) File
2. If the FLEXwrap License Server runs on a different machine from the machine where the wrapped binary
resides, remove the network dependency by copying the FLEXwrap license file to a drive local to the wrapped
binary. We recommend putting the license file in the directory where the wrapped binary resides and calling it
FLEXwrap.lic
3. Edit
swrapper.lf
the license file on the local disk. For example:
7788@machinea;"C:\Program Files\SAMwrap\v8.2\FLEXwrap.lic
If, when installing FLEXwrap on Windows, you chose to use the path to the license file instead of
find the FLEXwrap license file, you will not have to edit
information it needs to find the license file.
The Wrapper will also check the
AdminStudio 9.5 User Guide
line will contain the words:
FEATURE
.
in the directory where the wrapped binary resides and add a semi-colon (;) and the path to
SWRAP_LICENSE_FILE
ADS-0950-UG00
Chapter 21: License-Enabling Packages Using FLEXwrap
VENDOR_STRING=failsafe
line; you must specify failsafe mode when generating the license. See
for instructions on generating license files.
swrapper.lf
environment variable after checking
Managing FLEXwrap License Files
line for the wrapped application. The
FEATURE
. This is part of the license key, so you cannot just
because it already contains the
to
port@host
.
swrapper.lf
1657