Novell ADMINSTUDIO 9.5 User Manual page 1675

Table 21-25 • FLEXwrap Application Information Dialog Box Options—Advanced View (cont.)
Option
Wait for license
Group by
Runtime name
AdminStudio 9.5 User Guide
Description
Select one of the following options to define the queuing behavior of this wrapped
application:
•
Always—Queue for a license if one cannot be obtained. When a license
becomes available, the binary will run. This is for use when failsafe is not on.
This is recommended for batch jobs. (
• Ask—If a license cannot be obtained, shows who is using the licenses and asks
the user if they want to queue for a license. If the user answers Y, the Wrapper
will wait until a license is available. When one becomes available, the binary will
run. (
w_queue=2
•
Never—No queueing.
FLEXwrap allows you to specify that simultaneous uses of the wrapped application
by the same user (or host, or user/host combination, etc.) will not require a license.
The default is that each process requires its own license. To accept this default, in
, choose None.
swsetup32
You can group on:
•
User—All requests from the same user use only one license.
• Host—All requests from the same host use only one license.
•
User + Host—All requests from the same user on the same host use one
license.
• Site—All requests use one license.
Some application programs require that their
the application file name. To accommodate these rare cases, FLEXwrap allows you
to specify what value to pass as
box. For more information on specifying a Runtime name, see
ADS-0950-UG00
Chapter 21: License-Enabling Packages Using FLEXwrap
w_queue=1
)
to the application by entering a name in this
argv[0]
Managing FLEXwrap License Files
)
is different from the last part of
argv[0]
Runtime Name.
1675