Running Qualitymonitor From The Command Line - Novell ADMINSTUDIO 9.5 User Manual

Running QualityMonitor from the Command
Line
QualityMonitor can be run from the command line by using
Table 17-5 • QualityMonitor Command Line Parameters
Syntax
-c <MSI Product Code>
-f <Project File>
-h or -?
AdminStudio 9.5 User Guide
Options
-sn
-sb
-r <Report File>
-f <Project File>
-sn
-sb
-r <Report File>
ADS-0950-UG00
Chapter 17: Ensuring Package Quality Using QualityMonitor

Running QualityMonitor from the Command Line

. It can accept the following parameters:
isqm.exe
Description
Launch QualityMonitor by opening the MSI product
specified by the product code. For example:
isqm.exe -c {BDC62375-07B4-4CBD-9991-4C25C24F3071}
isqm.exe -c {BDC62375-07B4-4CBD-9991-4C25C24F3071} -
sb -f <c:\projectfile.iqm>
Run QualityMonitor silently without any user interaction and
no progress display.
Run QualityMonitor silently with a progress display.
QualityMonitor displays the test names as they are
executed and provides an option for the user to cancel.
Generates a report file
<c:\report.htm>
results. Works only when using either
Save test results in this file. This is necessary when using
either or . If this file does not exist, it will be created
-sn -sb
and then results will be saved.
Launch QualityMonitor with this Project File. For example:
isqm.exe -f c:\mydocuments\mytesting\tesresults.iqm
isqm.exe -f c:\mydocuments\mytesting\tesresults.iqm
-sn
Run QualityMonitor silently without any user interaction and
no progress display.
Run QualityMonitor silently with a progress display.
QualityMonitor displays the test names as they are
executed and provides an option for the user to cancel.
Generates a report file
<c:\report.htm>
results. Works only when using either
Help
with the test
or .
-sn -sb
with the test
or .
-sn -sb
1397