Running And Resolving A Manual Test - Novell ADMINSTUDIO 9.5 User Manual

<TestData>
<Details>The 'Example' test is run to detect the state of something and respond
accordingly. You should describe why it is important.</Details>
<KBArticle>TestHelpTopics\Example.htm</KBArticle>
<Perform>
</Steps>
</Perform>
<Resolve>
</Resolve>
</TestData>
</TestCase>
3. Customize the copy of the
Test.
4. Open PackageExpert. If, in the
Test Category you entered.

Running and Resolving a Manual Test

PackageExpert provides a sample Manual Test named Desktop Icons that you can use to learn how to run and
resolve a Manual Test.
Running a Manual Test
To run the Desktop Icons Manual Test, perform the following steps:
AdminStudio 9.5 User Guide
<Incomplete state="Ran - Incomplete" severity="Informational">The 'Example' test has
not been completely run.</Incomplete>
<Fail state="Ran" severity="Informational">The 'Example' test ran and failed.</Fail>
<Pass state="Ran" severity="Error">The 'Example' test ran successfully.</Pass>
<Steps>
<Step step="1" state="Pending" type="text">Step 1 - Describe the process with
inline text.</Step>
<Step step="2" state="Pending" type="link">Step 2 - Instructions on a web page.
<Direct>http://www.cnn.com</Direct></Step>
<Step step="3" state="Pending" type="file">Step 3 - Instructions referencing a
local file.<Direct>images\info.gif</Direct></Step>
<Incomplete state="Ran" severity="Warning">The 'Example' test resolution process is
incomplete.</Incomplete>
<Complete state="Resolved" severity="Informational">The 'Example' test resolution
process completed successfully.</Complete>
<Steps>
<Step step="1" state="Incomplete" type="text">Step 1 - Describe the resolution
process with inline text.</Step>
<Step step="2" state="Incomplete" type="link">Step 2 - Resolution instructions on a
web page.<Direct>http://www.msnbc.com</Direct></Step>
</Steps>
<TestCase>
ADS-0950-UG00
Chapter 14: Identifying and Resolving Package Errors Using PackageExpert
element to define your Manual Test, as described in
element you set
<TestCase>
, a new node will be listed in the
selected="true"
Adding Manual Tests
Sample Manual
1289