Novell ADMINSTUDIO 9.5 User Manual page 1506

Chapter 19: Distributing Packages Using Configuration Manager Web Console
Distributing Packages Using the Configuration Manager Web Console
Option
After Running
6. Click the Requirements tab and enter the following information:
Option
Estimated disk
space
Maximum allowed
run time
Notify user if the
program runs 15
minutes longer than
estimated
This program can
run on any platform
1506
Description
The action that occurs after this program is completed successfully.
• No action required—No restart or logoff is required. This is the default value.
•
Program restarts computer—The program requires a restart and performs the
restart automatically.
•
Configuration Manager restarts computer—Configuration Manager restarts
the computer.
• Configuration Manager logs user off—Configuration Manager logs the
current user off the computer after the program is completed. Use this option if
the program requires that the user log off and then log on again before it can run.
Note • On 16-bit clients, only No action required is supported.
Caution • Both the Configuration Manager restarts computer and the Configuration Manager
logs user off actions are done forcefully after providing the user with a grace period. Applications
that are running on clients when this occurs will not have an opportunity to save their states or
data.
Description
A whole number greater than or equal to zero that represents the amount of disk
space the software will require when installed on the client. Also, specify the units
for the value.
A whole number greater than zero that represents the time (in minutes) required
to run the program on the client.
Configuration Manager will monitor the run time of the program and warn the
user if the program is taking longer to run than the estimated time. By default, this
check box is cleared.
Note • This feature is not supported on 16-bit clients.
The program can run on any platform. If this option is selected, Configuration
Manager does not check the platform type when advertising the program to
clients. By default, this option is selected.
ADS-0950-UG00 AdminStudio 9.5 User Guide