MACROMEDIA FLASH MX 2004-USING FLASH Use Manual page 402

Configuring a Fill in the Blank interaction
The Fill in the Blank interaction uses a question text field, a user entry text field, a control button,
and a feedback text field.
To set up a Fill in the Blank interaction:
If you are not using a quiz template, place the learning interaction on the Stage. If you are using
1.
a quiz template, select the frame on the Interactions layer that contains the Fill in the Blank
interaction (Frame 3, if you have not added or removed keyframes).
Break the movie clip apart (Modify > Break Apart), display the Component Inspector, and then
2.
type the interaction ID and the question. See
on page 393.
In the Component Inspector, do one of the following to enter one to three possible
3.
correct answers:
Type the text for the responses that the user can enter that are considered correct responses.
Select the Correct option to the right of the correct responses.
To set up the interaction to accept all responses except those you type, enter the invalid
responses in the list and deselect the Correct option to the right of them. Then select the
Other Responses option, to indicate that all other responses are correct.
Specify whether the matching responses are valid only if they match the case of the text you
4.
entered (by selecting Case Sensitive) or if they are valid regardless of the capitalization the user
enters (by deselecting Case Sensitive).
402 Chapter 19: Creating E-learning Content
"Configuring a Learning Interaction component"