Setting Navigation Options For A Learning Interaction - MACROMEDIA FLASH MX 2004-USING FLASH Use Manual

Specify the Weighting value for the interaction. The quiz templates use this parameter to
5.
calculate the score in the Results page. The default value is 1.
Weighting indicates the relative importance of a question. You can enter any numeric value. If
all learning interactions have a weight of 1, they are all scored equally. A weight of 2 counts
twice as much as a weight of 1 and half as much as a weight of 4. For example, you can give
advanced questions a weight of 3 and beginning-level questions a weight of 1.

Setting navigation options for a learning interaction

Documents created using the quiz templates have built-in navigation; make sure to turn
Navigation off if you're using a quiz template. For documents that do not use the quiz template,
you can set navigation options that display a Next Question button in your document.
To set navigation options for an interaction:
Select the Learning Interaction component to the left of the Stage in the quiz template.
1.
If the Component inspector is not already visible, open it from the Property inspector, and then
2.
click Options at the bottom of the panel.
Under Navigation, specify how the interaction proceeds after the user submits a response for
3.
this interaction:
Select Off to disable navigation. Select this option if you are using the quiz templates,
because the templates include their own navigation.
Select Next Button to require that the user click a Next button after submitting a
response. In the GoTo Action field, select either Stop or Play. The Next button is a
Button component that you can use with stand-alone interactions independent of the
quiz template.
If you want to navigate to a labeled frame instead of the next frame, enter a frame label in
the GoTo Label text box.
The default text for the Next button is Next Question. If you want to change the text, see
"Setting control button labels for a learning interaction" on page
Select Auto GoTo Next Frame to have the interaction proceed to the next frame after the
user submits a response.
If Feedback is deselected and Knowledge Track is selected, the Auto GoTo Next Frame
feature can be enabled. This feature submits a score after evaluation and immediately
navigates to the next frame for the next interaction.
Note: If Feedback is selected or Knowledge Track is deselected, Auto GoTo Next Frame is
reset to Next Button and an error message appears in the Output panel.

Setting navigation options for a learning interaction

414.
413