MACROMEDIA FLASH MX 2004-USING FLASH Use Manual page 393

Configuring a Learning Interaction component
Included with each quiz template is one of each of the six learning interaction types, stored in
movie clips in the library. These movie clips are simply containers for the collection of elements
that make up each interaction. When you add an interaction (movie clip) to the Stage, you must
break it apart to edit the individual objects.
To configure a Learning Interaction component:
With the entire learning interaction selected, select Modify > Break Apart. This breaks the
1.
interaction into individual objects that can be modified.
Note: Make sure that you break apart the interaction only once. See
is broken apart" on page
Deselect all the items on the Stage (Control+Shift+A).
2.
Select the Learning Interaction component.
3.
Note: Do not delete these instructions from the document; they contain necessary ActionScript
code and do not appear in the SWF file.
398.
Including a Flash learning interaction in a document
"Testing to see if a movie clip
393