MACROMEDIA FLASH MX 2004-USING FLASH Use Manual page 15

To save a Flash document:
Do one of the following:
1.
To overwrite the current version on the disk, select File > Save.
To save the document in a different location and/or with a different name, or to compress
the document, select File > Save As.
If you selected the Save As command, or if the document has never been saved before, enter the
2.
filename and location.
Click Save.
3.
To revert to the last saved version of a document:
•
Select File > Revert.
To save a document as a template:
Select File > Save As Template.
1.
In the Save As Template dialog box, enter a name for the template in the Name text box.
2.
Select a category from the Category pop-up menu, or enter a name to create a new category.
3.
Enter a description of the template in the Description text box (as many as 255 characters). The
4.
description appears when the template is selected in the New Document dialog box.
Click OK.
5.
To save a document as a Flash MX document:
Select File > Save As.
1.
Enter the filename and location.
2.
Select Flash MX Document from the Format pop-up menu. If an alert message indicates
3.
that content will be deleted if you save in Flash MX format, click Save As Flash MX to
continue. This might happen if your document contains features, such as behaviors, that are
available only in Flash MX 2004. These features will not be preserved when you save the
document in Flash MX format.
Click Save.
4.
To save documents when quitting Flash:
Select File > Exit (Windows) or Flash > Quit Flash (Macintosh).
1.
If you have documents open with unsaved changes, Flash prompts you to save or discard the
2.
changes for each document.
Click Yes to save the changes and close the document.
Click No to close the document without saving the changes.
Saving Flash documents 15