Customizing Html Publishing Templates - MACROMEDIA FLASH MX 2004-USING FLASH Use Manual

Customizing HTML publishing templates

If you're familiar with HTML, you can modify HTML template variables to create an image
map, a text report or a URL report, or to insert custom values for some of the most common
Flash and
object
Navigator, respectively).
Flash templates can include any HTML content for your application or even code for special
interpreters such as ColdFusion and ASP.
To modify an HTML publishing template:
Using an HTML editor, open the Flash HTML template you want to change. These templates
1.
can be found in the following locations:
For Windows operating systems:
Windows 2000 or XP
Application Data\Macromedia\Flash MX 2004\<language>\Configuration\HTML
The <boot drive> is the drive from which 2000 or XP boots (usually C).
The <user> is the name of the person logged in to the 2000 or XP.
The <language> is set to an abbreviated language name. For example, in the US, <language>
is set to "en" for English.
Note: The Application Data folder is normally a hidden folder; you might need to change your
Windows Explorer settings to see this folder.
Windows 98
First Run\HTML
For Macintosh operating systems:
Macintosh OS X 10.1.5 and 10.2.6 and later
Macromedia Flash MX 2004/First Run/HTML
Edit the template as needed.
2.
For information on variables that Flash supports, see the table that follows this procedure.
For information on creating an image map or a text or URL report, or to insert
custom values for
follow this procedure.
When you finish editing the variables, save the template in the same folder from which you
3.
retrieved it.
To apply the template settings to your Flash SWF file, select File > Publish Settings, select the
4.
HTML panel, and select the template you modified.
Flash changes only the template variables in the template selected in the Publish Settings
dialog box.
Select your remaining publish settings, and click OK. For more information, see
5.
Flash documents" on page
330 Chapter 15: Publishing
parameters (for Internet Explorer and Netscape Communicator/
embed
<boot drive>:\Documents and Settings\<user>\Local Settings\
boot drive:\Program Files\Macromedia\Flash MX 2004\language\
and
object embed
311.
Macintosh HD/Applications/
parameters, see the sections for those topics, which
"Publishing