MACROMEDIA FLASH MX 2004-USING FLASH Use Manual page 316

To publish HTML that displays your Flash SWF file:
Do one of the following to open the Publish Settings dialog box:
1.
Select File > Publish Settings.
In the Property inspector for the document (which is available when no object is selected),
click the Settings button.
Note: To create a publish profile for the publish settings that you'll specify, see
profiles" on page
On the Formats tab, the HTML file type is selected by default. In the File text box for the
2.
HMTL file, either use the default filename, which matches the name of your document, or enter
a unique name, including the .html extension.
Click the HTML tab to show HTML settings and select an installed template to use from the
3.
Template pop-up menu. Then click the Info button to the right to show a description of the
selected template. The default selection is Flash Only.
If, in the previous step, you selected an HTML template other than Image Map or QuickTime,
4.
and on the Flash tab, you set the Version to Flash Player 4 or later, you can select Flash Version
Detection.
Note: Flash Version Detection configures your document to detect the version of Flash Player
that the user has and sends the user to an alternate HTML page if the user does not have the
targeted player. For more information on version detection, see
Flash Player detection" on page
Select a Dimensions option to set the values of the
5.
and tags:
embed
Match Movie
Pixels
enters the number of pixels for the width and height in the Width and Height field.
Percent specifies the percentage of the browser window that the SWF file will occupy.
Select Playback options to control the SWF file's playback and features, as described in the
6.
following list:
Paused at Start
shortcut menu. By default, the option is deselected and the Flash content begins to play as
soon as it is loaded (the
Loop
repeats the Flash content when it reaches the last frame. Deselect this option to stop the
Flash content when it reaches the last frame. (The
Display Menu
(Macintosh) the SWF file. Deselect this option to show only About Flash in the shortcut
menu. By default, this option is selected (the
Device Font
not installed on the user's system. Using device fonts increases the legibility of type at small
sizes and can decrease the SWF file's size. This option affects only SWF files that contain static
text (text that you create when authoring a SWF file and that does not change when the Flash
content appears) set to display with device fonts. For more information, see
fonts (static horizontal text only)" on page
316 Chapter 15: Publishing
327.
318.
(the default) uses the size of the SWF file.
pauses the SWF file until a user clicks a button or selects Play from the
parameter is set to
PLAY
shows a shortcut menu when users right-click (Windows) or Control-click
(Windows only) substitutes anti-aliased (smooth-edged) system fonts for fonts
"Configuring publish settings for
and
width height
.
true)
parameter is on by default.)
LOOP
parameter is set to
MENU
115.
"Using publish
attributes in the
object
true).
"Using device