Configuration Menu; Introduction; Menu Information - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

Configuration Menu

Introduction

The Configuration Menu is only available from an administrator login. It includes submenus for configuring every
aspect of the switch. Changes to configuration are not active until explicitly applied. Changes can be saved to non-
volatile memory (NVRAM).

Menu information

Command: /cfg
[Configuration Menu]
sys
port
l2
l3
qos
acl
rmon
pmirr
ufd
dump
ptcfg
gtcfg
cur
The following table describes the Configuration Menu options.
Table 77 Configuration Menu options
Command
sys
port <port number>
l2
l3
qos
acl
rmon
pmirr
ufd
dump
ptcfg <host name or IP address of
FTP/TFTP server> <filename on host>
gtcfg <host name or IP address of
FTP/TFTP server> <filename on host>
cur
- System-wide Parameter Menu
- Port Menu
- Layer 2 Menu
- Layer 3 Menu
- QOS Menu
- Access Control List Menu
- RMON Menu
- Port Mirroring Menu
- Uplink Failure Detection Menu
- Dump current configuration to script file
- Backup current configuration to FTP/TFTP server
- Restore current configuration from FTP/TFTP server
- Display current configuration
Usage
Displays the System Configuration Menu.
Displays the Port Configuration Menu.
Displays the Layer 2 Configuration Menu.
Displays the Layer 3 Configuration Menu.
Displays the Quality of Service Configuration Menu.
Displays the Access Control List Configuration Menu.
Displays the RMON Configuration Menu.
Displays the Mirroring Configuration Menu.
Displays the Uplink Failure Detection Configuration Menu.
Dumps current configuration to a script file.
Backs up current configuration to FTP/TFTP server.
Restores current configuration from FTP/TFTP server.
Displays the current configuration parameters.
Configuration Menu 88